Quartz Tile Adhesive Recommendation

[Rosco100]

Hi we've used Tilemasters ultimate many times on Quartz with no problems,We always skim the back of the tile as they are sometimes dusyt and to aid the bond.

 

[craig_09]

Thanks for all the replies.

just received the tiles and their boxed jewelstone uk. Their 95% quartz. Anyone used these tiles?

website does not recommend using latex adhesive so mapei granirapid may not be suitable.
tilemasters ultimate sounds good but worried about the water mix?

or Bal Pourable thick bed with Bal Admix AD1

Whats the best choice guys?

thanks

 

[Stef]

You will be hard pushed to find a better adhesive than TileMaster Ultimate.
It will stick to quartz without a problem.

 

[Rosco100]

You will be hard pushed to find a better adhesive than TileMaster Ultimate.
It will stick to quartz without a problem.

its the belts and braces of tile adhesive !

 

[Chalker]

You will be hard pushed to find a better adhesive than TileMaster Ultimate.
It will stick to quartz without a problem.

Amazing addy!
sticks like hell.
dont they use it to stick the heat resistant tiles on the space shuttle? :sofahide:

 

[Stef]

I heard that Paul.. [emoji23][emoji23]

Used it with Pete & Alan up at the SuperDry store & it is a really fantastic adhesive.

 

[craig_09]

Thanks a lot guys.. I'll go for tilemasters ultimate!

can you recommend a grout to go with it grey and anthracite.
also the best product to prime the concrete floor.

thanks very much

 

[Chalker]

Thanks a lot guys.. I'll go for tilemasters ultimate!

can you recommend a grout to go with it grey and anthracite.
also the best product to prime the concrete floor.

thanks very much

If you are going with Tilemaster ultimate. You would be best using their primer and grout too.
http://www.tilemasteradhesives.co.uk