A
A J
Hi all,
New here although have been following the odd thread or two on and off.
I have a strange initial question and I am hoping to get some advice. Before I knew about this forum, I contacted about 20 odd tilers from CaT and pretty much 0 got back to me.
So I jumped onto Rated and MyBuilder and got a couple of interested tilers.
One has now quoted but I have no idea if it is a good or bad quote - obviously if I had a few quotes I could compare.
The job is not huge which is part of the issue I think.
It's essentially tiling the bathside and either side of the bath tub wall (small) as the developers only half-tiled it making it unusable.
Rough dimensions of area to be tiled:
Along bath: 120cm
Along wall: 70cm
Along Opp wall: 90cm
From current trim to ceiling (area required to tile): 120cm
Tile size: 31.6 x 59.2cm
Being a new build, the walls are pretty much prepped and ready to go as the bathroom has not been used due to the half-tile issue.
What should I be expecting roughly for this as a quotation in the GU (Surrey) area? Tiles and grout is supplied so its just the adhesive and trim
I will list the job on here too but I think I will have issues with timing for next week installation.
I found a few threads with rough sq/m costs but I am unsure how to even calculate the sq/m requires tiling with the above measurements.
Thanks in advance
AJ
New here although have been following the odd thread or two on and off.
I have a strange initial question and I am hoping to get some advice. Before I knew about this forum, I contacted about 20 odd tilers from CaT and pretty much 0 got back to me.
So I jumped onto Rated and MyBuilder and got a couple of interested tilers.
One has now quoted but I have no idea if it is a good or bad quote - obviously if I had a few quotes I could compare.
The job is not huge which is part of the issue I think.
It's essentially tiling the bathside and either side of the bath tub wall (small) as the developers only half-tiled it making it unusable.
Rough dimensions of area to be tiled:
Along bath: 120cm
Along wall: 70cm
Along Opp wall: 90cm
From current trim to ceiling (area required to tile): 120cm
Tile size: 31.6 x 59.2cm
Being a new build, the walls are pretty much prepped and ready to go as the bathroom has not been used due to the half-tile issue.
What should I be expecting roughly for this as a quotation in the GU (Surrey) area? Tiles and grout is supplied so its just the adhesive and trim
I will list the job on here too but I think I will have issues with timing for next week installation.
I found a few threads with rough sq/m costs but I am unsure how to even calculate the sq/m requires tiling with the above measurements.
Thanks in advance
AJ