removing floor tiles

[aph257]

I have a job coming up that requires 10m2 of 30X30 ceramics to be taken up. whats the easiest method? I have a breaker but havn't used it for this purpose or do i use this and the old lump hammer and bolster?

 

[jay]

take its a concrete sub kanga with a wide blade chisel works for me :8:

 

[peckers]

i have a 3" chisel that fits my sds drill removes them well or bolster and lump hammer once removed you can use a cupped diamond wheel to remove old adhesive etc

 

[doug boardley]

I use a 2" chisel on my sds hammer drill

 

[aph257]

Thanks all, what i called a breaker is a SDS hammer drill so will use that.
Peckers, your "cupped diamond wheel" is that on a angle grinder?

 

[White Room]

Try a hammer and bolster to start, they may pop up, if not go the sds route