removing sealer and grout from travertine

Hi everyone

been tiling for nearly 2 years, and have got loads of good advice from your posts, although havn't posted myself.
Been lucky so far and had few problems, untill today.
I sealed the travertine walls but overnight the grout joint have wept and stained the tiles, tried to clean with heavy duty tile cleaner and reseal, but it just hasn't removed the stains, any suggestions on cleaning products that might work would be much appreciated
 
Yeah, sealed about 2 hours after grouting

That's your problem, the grout has wept into the sealer. Try LTP grimex to remove, you will need to reseal again after, make sure you leave at least 24 hours before you reseal. For future reference, always make sure grout has fully set before applying any sealer.
 
Was thinking of using solvex to remove sealer,then tile cleaner, then reseal, but might give grimex a go first if you guys think that would work, cheers all for your advice
 

Advertisement

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.2%
  • Kerakoll

    Votes: 17 9.9%
  • Ardex

    Votes: 12 7.0%
  • Mapei

    Votes: 49 28.5%
  • Ultra Tile

    Votes: 21 12.2%
  • BAL

    Votes: 40 23.3%
  • Wedi

    Votes: 4 2.3%
  • Benfer

    Votes: 5 2.9%
  • Tilemaster

    Votes: 24 14.0%
  • Weber

    Votes: 19 11.0%
  • Other (any other brand not listed)

    Votes: 17 9.9%
  • Nicobond

    Votes: 8 4.7%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 2.9%
Back
Top

Click Here to Register for Free / Remove Ad