Discuss Residue in the British & UK Tiling Forum area at TilersForums.com.

P

Peter Woods

How can I get rid of a sticky residue left after apply Lithofin stain stop to balck granite as per the instructions. It shows up shoe prints. Which product should I use or is it elbow grease?

I started to read the article about sealing stone on another thread and it reminded me of my time in a fireplace factory, nothing was sealed until the fireplace was complete, it was grouted and cleaned. I don't remember having problems cleaning off ( granite, marbles, slate, connemara marble and donegal stone (with fools gold in it) being the most porous) . Could it have been sealed in the quarry/mill? The boss would arrive with his boiled linseed mix with secret additives, he would polish it up, concentrating on fresh cut edges I might add, just as it was literally being loaded into the van !!!! Don't know what was in the bottle, he kept it locked away. He never got any complaints either, even when we used to p*ss in the jar he kept it in!!! Ha ha, I could write a book about that place.


Woodsy
 
D

DHTiling

you should have removed any residue before it dried.....
The surface to be treated must be completely dry and clean.
Where no prior experience exists or in cases of doubt, try the
product in an inconspicuous area prior to use. Areas should be
treated in sections of approx. 10 to 15m². Evenly apply a
consistent amount of Lithofin MN Stain-Stop with a brush, a
roller or a cloth. On highly absorbent surfaces, this procedure
may have to be repeated after five minutes. Do not allow the
surface residues to dry. Residues must be completely removed
within ten minutes with a cloth. On large surfaces, remove the
residues with a squeegee and polish with a white pad.
Attention! the liquid product must sink into the stone. Do not
allow the product to dry on the surface. Dry residues will not be​
removable after 3 to 4 hours.
You will have to remove the sealer and do it again... i recommend you use
lithofin wax off..Removes layers of wax, sealants, tar, oil stains, lacquer and glue. Soiling is dissolved and can then be washed off with water.

Good luck dave......

 

Reply to Residue in the British & UK Tiling Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi all, I live in Cyprus. Bought a new build top floor flat a couple of years ago with a roof...
Replies
3
Views
2K
    • Like
The growing popularity of “Thin Porcelain Tile” Now that industry professionals have coined a...
Replies
11
Views
11K
Rizzle from the Portizzle
R
Hello, I have some 'black' Nero granite unglazed porcelain tiles (actually very dark grey)...
Replies
9
Views
5K
TJ Smiler
T
E
Hi All, Hoping someone can help. I've had rather a lot of work done on my property - inlcluding...
Replies
3
Views
7K
D
http://youtu.be/Ooj6TS0pNTA Tile drilling specialists 365-Drills are the international...
2
Replies
23
Views
3K
Deleted member 1779
D

Trending UK Tiling Threads

UK Tiling Forum Popular

Advertisement

Thread Information

Title
Residue
Prefix
N/A
Forum
British & UK Tiling Forum
Start date
Last reply date
Replies
2

Thread Tags

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.5%
  • Kerakoll

    Votes: 15 9.1%
  • Ardex

    Votes: 12 7.3%
  • Mapei

    Votes: 49 29.7%
  • Ultra Tile

    Votes: 20 12.1%
  • BAL

    Votes: 38 23.0%
  • Wedi

    Votes: 4 2.4%
  • Benfer

    Votes: 2 1.2%
  • Tilemaster

    Votes: 21 12.7%
  • Weber

    Votes: 19 11.5%
  • Other (any other brand not listed)

    Votes: 17 10.3%
  • Nicobond

    Votes: 8 4.8%
  • Norcros

    Votes: 3 1.8%
  • Kelmore

    Votes: 5 3.0%

Birthdays

You're browsing the UK Tiling Forum category on TilersForums.com, the tile advice website no matter which country you reside. Our UK based online tiling forum has 48,000 members and started out in 2006.

Top