scraper

[py rookie]

hi guys just wondering if any one nose of a good scraper,i need to scrap all this 2 part addy off the floor,layed about a year ago and its a nightmare with just a standard scraper

cheers

 

[Tomtiler]

i would use an sds drill with the chisel

 

[The Legend; Phil Hobson RIP]

A good manual scraper is the bulldog, very heavy duty. Topps used to sell them, cracking tool, I will try to find a link

 

[suave]

club hammer and bolster if uve no sds drill

 

[Gazzer]

Had one of these for years and its awesome TradeTiler.Ltd

 

[Gazzer]

Failing that I have a scraper on my Fein which is a bit slower but uses less of my energy.

 

[The Legend; Phil Hobson RIP]

Faithfull Roofing Scraper (long Handled 54in) - Faithfull Power Plus available at Toolbox

 

[The Legend; Phil Hobson RIP]

Not the same brand. but it looks the same, very heavy does all the work for you.

 

[Gazzer]

Not the same brand. but it looks the same, very heavy does all the work for you.

Yup great for removing tiles, not so sure on flexible adhesives unless you kept it sharp. Good tool though. Wickes sell them too and Screw fix

 

[py rookie]

thanks i'll go shopping tommorw,dont think my boss wants me to waste another afternoon scraping up old addy

 

[doug boardley]

sds chisel in drill for me

 

[Rich]

What is the adhesive stuck to? If it is stuck to ply, you would be better to replace this, if it is on a screed then as above

I have a tool like that but mine is called "The Mutt"... Love it!

 

[py rookie]

its was stuck to chipboard,it was a nightmare,gad to see the back of that job

 

[Rich]

No wonder it needed to come up, chipboard is not a suitable surface to tile onto. Was it re-tiled?

 

[py rookie]

i guess,i dont know i wasjust told to scrap off all addy,clean up and leave it.why is chipboard not suitable?