Sealant on tiled floor

[Kittykatt]

There are no lumps left as I've removed them, the only thing left is like a sticky residue (almost glue like), it's like what sellotape leaves behind.

 

[andy8758]

There are no lumps left as I've removed them, the only thing left is like a sticky residue (almost glue like), it's like what sellotape leaves behind.

Sounds a bit like No More Nails. It will be removable - but what removes it depends on exactly what it is. Just a thought - ring the plumber and ask him?

 

[The Legend; Phil Hobson RIP]

This might be worth a go. http://www.*************/p/de-solv-...cat:cleaning&gclid=CNiKhfuNiq8CFQITfAodNWCt-Q Oops. will try that again.

 

[The Legend; Phil Hobson RIP]

http://www.*************/p/de-solv-it-sticky-stuff-remover-200ml/51059?cm_mmc=Google-_-Datafeed-_-Cleaning-_-De.Solv.It%20Sticky%20Stuff%20Remover%20200ml&gclid=CJvdx8eXiq8CFUsMtAodRRD48w

 

[Ian]

Is it a screw fix link phil? For some reason the forum doesn't like them!


Sent via Tapatalk for iPhone

 

[Perry]

There are no lumps left as I've removed them, the only thing left is like a sticky residue (almost glue like), it's like what sellotape leaves behind.

Pure gum turpentine removes sticky tape labels ect

 

[AliGage]

I picked up a can of "crack it" from my local plumbers merchants the other week. It's just like WD40 only better. But that cleaned all the Silicon off the exsisting bath a treat. But to be honest any silca based spray i've found will and should remove silcone residue.

There are solutions made specifically for Silicon removal though as some have suggested. Worth a try, can't give you a recommedation though as i've always used WD40.

 

[The Legend; Phil Hobson RIP]

Sorry Kittykat the links didn't work. the product was sticky stuff remover. If you google it.

 

[Kittykatt]

Thanks to everyone and I have bought the sticky stuff remover so fingers crossed. For the great folks who have emailed me letting me know it's an easy mistake to make, I do understand that mistakes do happen but I should have explained more about the panels. The panels wouldn't fit on as they curve inwards so when the large panel was fitted upside down, the 2 side panels wouldn't meet the corners,.....so looking at it I think it's quite self explanatory to turn the main panel the other way around. Hence why this muppet will never be allowed near my home ever again! Thanks again

 

[davebates]

acetone based nail varnish remover would have got it off in seconds with no damaged to the tiles or grout just dont get it on plastics.....