sealant questions

[choffer74]

hi,

i've got a couple of sealant questions. I've got about 15m internal edges that will need Silicon sealant - how many tubes will i need? i was planning on getting some cornertape to make it look neat.

We've got gloss white cupbaords, grey stone effect tiles and planning on using black grout. (And yes i've read on here about the nightmare black grout can be)! I take it i should be using black sealant? or should i use white sealant when its against the white cupboards and black grouting when its against the work surface?
any recommendataions for the make? i was thinking of dow corning.
thanks
graham

 

[White Room]

What colour is the work tops..

 

[choffer74]

http://dl.dropbox.com/u/26603900/P1000100.JPG
hi,
its black worktop. let me know if you think black grout wont go.
thanks

 

[The Legend; Phil Hobson RIP]

I tend to use clear silicon, as it takes on the colour of the tile/worktop, and doesn't stand out

 

[Qwerty]

One tube will probably do it (but safer to get 2).....as for colour, its totally a personal choice. Black grout with black Silicon IMO is too overpowering. I would go either white or grey to match the tiles.

Mapei or Dow Corning is the best......again, my opinion only but one which is shared by many Pros on here

 

[choffer74]

One tube will probably do it (but safer to get 2).....as for colour, its totally a personal choice. Black grout with black Silicon IMO is too overpowering. I would go either white or grey to match the tiles.

Mapei or Dow Corning is the best......again, my opinion only but one which is shared by many Pros on here

thats why i came onto this forum - to get some advice from people that know!
thanks

 

[White Room]

I tend to use Mapei Silicon, the dow corning I have'nt used..

 

[Daz]

I think the colour is a personal choice, so just use your best judgement (or post some pics up here and we'll take a vote for you :lol.

My Silicon preference is always Dow Corning or Mapei.

Good luck,

Daz

 

[choffer74]

I think the colour is a personal choice, so just use your best judgement (or post some pics up here and we'll take a vote for you :lol.

My Silicon preference is always Dow Corning or Mapei.

Good luck,

Daz

i've just started the grouting, once finished i'll add some photos for a vote!

 

[ms.tiles]

mapei is my choice of Silicon although ardex are starting to do a colour match range to their grouts.
ive only used black Silicon once or twice but in my opinion found it quite shiny.
as said above its a personal choice.

 

[choffer74]

change of plans - started doing the black grouting and decided it doesnt go! It stands out too much and takes away from the tiles themselves. Luckily i've only done less than 2m2 but i think its going to take a while raking out what i've done so far.

I think i'm going to go for mapei kk medium grey. I take it that i should use the same colour sealant?

Also it means i've got some Mapei ultracolor plus black grout going spare - anyone close to Mile End, London let me know.