Self levelling compound on top of 100mm insulation

[colink]

Will this work?
(top to bottom)
tiling (one room), 12mm laminate (other room)
19mm T&G chipboard
self levelling compound
100mm Kingspan insulation (joints and edges sealed so self levelling does not run below insulation.
concrete slab (not level)

LevelFlex | Flexible Fibre Reinforced Self Levelling Floor Compound

Levelflex is a flexible, fibre reinforced, protein free cement based formulation designed for smoothing and levelling sub-floors in preparation to applying a floor finish.

www.tilemasteradhesives.co.uk

Considering this fibre reinforced self levelling compound. It is designed to go on top of floor boards or on top of the T&G

Due to mixed levels over two rooms my preference is to put self levelling on top of the insulation VS on top of the T&G

Will this work?

I assume I need to prime the insulation with the manufacturers primer.

Thanks ColinK

 

[Ajax123]

Why levelling compound in top of insulation. That's bonkers! If the concern is that it our if level. Put the levelling compound in the concrete underneath...