Self Levelling Compound

[pendleh]

Hi there

How do you create a perimeter for the self levelling compound? What do you use? Also if the floor is higher what kinda edge do you use?:stupid:

Best Wishes


Howard

Hi

Can I also ask do you need to prime the floor. Not used slc yet - first time.

Best Wishes


Howard

 

[brian c]

yes Howard prime floor before using slc,use a smoothe edge trowel to get an even finish,then prime again and tile.

 

[Leatherface]

Prime floor with manufacturers recommended primer.
No need to trowel floor much if you use a good self leveller such as mapei and get your water to powder ratio correct.
Use wood battens siliconed down to floor to create perimiter