Setting out tiles

[Tiredandhungry]

Hi all,
Due to money constraints I am having to renovate the bathroom myself.
I am trying my best to set out the tiles before starting to avoid slithers.
I'm using metro 20×10 tiles and 2mm gap.
But no matter which way I try I end up with either a cm gap at the ceiling or a slither under the window cill.
Its difficult due to the window.
Is there any advice that might help me get started please?

 

[Dave]

You have room to build cill height up to aid datums.

 

[Tiredandhungry]

You have room to build cill height up to aid datums.

Hi Dave,
Yes if I use the bath level to start I can get two tiles perfectly under cill and use the window center to get same cuts on either end.
If I raise the cill it will fix my issue yes.
But then I'll create a slither under the cill sadly

 

[Dave]

Hi Dave,
Yes if I use the bath level to start I can get two tiles perfectly under cill and use the window center to get same cuts on either end.
If I raise the cill it will fix my issue yes.
But then I'll create a slither under the cill sadly

By raising the cill height ( plasterboard it ) then you won’t have as small a slither.

 

[Tiredandhungry]

By raising the cill height ( plasterboard it ) then you won’t have as small a slither.

OK I see what your saying. I've some cement board left over.
I'll measure up and hopefully that would solve it
Many thanks

 

[Dave]

OK I see what your saying. I've some cement board left over.
I'll measure up and hopefully that would solve it
Many thanks

Let us know how you get on 👍