Sigma tile cutter, tile support arms

[DHTiling]

I think you do. I have sent out with orders from Italy some arms and they havent called to ask how they are fitted so all good there. Monday i can confirm this though.

Please do.. would be good for those that require them..

 

[Peter]

Had a look and seen that the 3 series cutters have a blank fitting in the body that it can just be drilled straight into but the old 4a/5b style have the bracket on the side so looks like it would be easily done on yours Dave, different for the older machines.

 

[Gazzer]

I have an arm on the left hand side of the 3DM but if it could be done then I would like one on the other side too but it would mean losing the handle. No biggy, if needed I have used spare tiles on the right of the cutter to rest the tiles on.

 

[Sigma UK]

No problem. I see if there are any pics i can find about changing them.

 

[DHTiling]

Had a look and seen that the 3 series cutters have a blank fitting in the body that it can just be drilled straight into but the old 4a/5b style have the bracket on the side so looks like it would be easily done on yours Dave, different for the older machines.

yes there is a blanked spot... hence why i asked 🙂