Small Gap Behind Mixer Controls

[AOIS]

Hello,

I’m looking for some advice please.

Behind the mixer control of my bath there looks to be a small gap between the back of the mixer control and the tile. It looks like it’s as a result of the mixer being installed over two tiles.

The shower head is right above the mixer so I’m concerned water could get behind?

Thanks in advance.

 

[Boggs]

Run some clear Silicon between cover plate and tiles.
Leave a small gap at the bottom so any moisture can drain away.

 

[Spare Tool]

https://www.google.co.uk/url?q=http...vCWcQFggZMAE&usg=AOvVaw28lpVtCk8ft6AIanmRbaDw
That should get you down the back to get some Silicon around the gap..

 

[Spare Tool]

Run some clear Silicon between cover plate and tiles.
Leave a small gap at the bottom so any moisture can drain away.

Oh I read it as a mixer tap on a bath..

 

[Waluigi]

Looks like a Hansgrohe Shower select.

No issue with sealing it as already mentioned and clear would be the obvious choice. These showers are actually designed to be sealed on the back plate, the chrome fascia simply slides over the top and doesntbusually need sealing.

 

[GoneGuy]

Put a bit of clear Silicon over it