Small Tiles and my Feature Wall

[brian c]

Re: Do you get stuck?

whats the best way to cut the little brick{dont know if they are natural stone or not}tiles that come in sheets 12x12 i think. ..... i would probably scribe them with a 10mm scribe in my dry cutter then run it through the wet cutter.....i would use white adhesive,pad tile down with grout float and then grout with white grout. i am thinkling of making a feature on a protruding wall in my lounge.what do you think?

 

[L & R CERAMICS]

sounds good post a piccy when its finished

 

[Elliott]

I found the wet cutter the best, made a wooden 'Spanner' to hold them with when cutting them.

 

[guy1976]

if its mosaic your talking about you can cut with your nippers if they are ceramic

 

[tony TLC]

hi brian i use a 22mm wheel (runs over the top butter) when marking stone mossys and mostly dry cut them look forward to piccy

 

[brian c]

Thanks for the replies,not doing job for 6wks though.

 

[DHTiling]

if ts the ones im thinking of i found wet cutter the best ( they were porcelain ) and have put marble ones on aswell , both look brill.....

 

[tjsmiler]

Scribe then snap off with your nipples if ceramic..... anything else wet cut.... what i do anyway mate

TJ