Guest viewing is limited

Discuss Solution To tile floor issues in the Canada Tile Advice area at TilersForums.com.

hi guys, thanks to this forum I am a little wiser.

I’m 1/2 way through my bathroom refurb been completed by a contractor, using various tradesmen.

The good news is only the bath is fitted, the bad news is it’s boarded over but still squeaking when walked on. They have also only used 9mm ply and put it down using nails. (See pics)

My thoughts are now asking them to tip it up, screw down new floor boards and then fix with screws 18mm ply. Do you think this would be a big delay?


Does this sound reasonable?

E203C52B-C40F-4847-85F2-27E60FD7B391.jpeg C2751D06-EEB6-4CE3-AE61-4B1340AB4BAB.jpeg F60D5D3A-6E59-4699-A0AA-335B0C5E8436.jpeg
 
W

WetSaw

Not a suitable substrate and also against British Standards.
Floor boards should have been screwed down first ( providing there's no deflection, bounce, in the floor) then overlaid with a suitable backer board which would generally be stuck down with tile adhesive and screwed.
 
Not a suitable substrate and also against British Standards.
Floor boards should have been screwed down first ( providing there's no deflection, bounce, in the floor) then overlaid with a suitable backer board which would generally be stuck down with tile adhesive and screwed.

What if there is deflection or bounce?
 
D

Dumbo

Could they screw the below direct to the floor boards?

View attachment 106664
No . You can use 12mm for overboarding but you would usually use 6mm . Overboarding means to fix on top of your existing floor boards or chipboard flooring which should be securely screwed to your floor joists first .
 

Reply to Solution To tile floor issues in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
450 x 450 porcelain tiles were laid on the bathroom floor recently. One of the tile sometimes...
Replies
4
Views
1K
    • Like
Hi all, My 1st post and just wanting some help/reassurance on a DIY bathroom refurb. I’m...
Replies
4
Views
2K
Hi people I'm in desperate need of advice So my builder who I let go due to poor work has...
Replies
3
Views
1K
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
2K
This is my first time posting, I searched for a similar thread and didn't find much- apologies...
Replies
3
Views
3K

Advertisement

Thread starter

Joined
Location
Fylde coast

Thread Information

Title
Solution To tile floor issues
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
7

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.1%
  • Kerakoll

    Votes: 14 9.5%
  • Ardex

    Votes: 11 7.4%
  • Mapei

    Votes: 44 29.7%
  • Ultra Tile

    Votes: 17 11.5%
  • BAL

    Votes: 35 23.6%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 21 14.2%
  • Weber

    Votes: 18 12.2%
  • Other (any other brand not listed)

    Votes: 15 10.1%
  • Nicobond

    Votes: 7 4.7%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.7%
Top