Stainless Steel Floor Tiles

[Simons70]

Any idea how can be cut this tiles?Never see before,we do some mosaic steel in the past but was 50x50 mm,2 mm. This range of tiles is made from heaver Stainless Steel and a thicker backing board than our wall tiles making them ideal for floors. 30cm x 30cm x 1cm and available in our five standard finishes

 

[Old Mod]

Have u tried stainless steel cutting disc for grinder?
Not expensive, very cheap.

 

[Simons70]

Have u tried stainless steel cutting disc for grinder?
Not expensive, very cheap.

For now is the only way to cut,but 10mm is not easy.I think maybe someone work with this and have some better solution.

 

[Old Mod]

View: http://youtu.be/eLA-vjRxKMs

 

[Simons70]

We do that,but this tiles is 10mm not 2 mm thickness.If exist some blade to put in DeWalt for stainless steel would be great.

 

[Old Mod]

The stainless isn't 10mm tho is it?
It's only covering.

 

[peteablard]

Id use a jigsaw

 

[J Sid]

Don't sigma's cut them then ? 😉

 

[Flintstone]

1mm slotting disk on grinder

 

[Italy]

Last time, cut with the teeth 🙂
Sorry, never done simon

 

[SJPurdy]

From the drawing (original post) I'd be worried about all that rot living under the stainless steel!

 

[Chalker]

They are thin stainless. Look at the pic, they have folded corners so will cut with a thin metal blade.

 

[Bill]

Looks like Rubi have brought out a blade for those pesky metal coated mosaics

https://pbs.twimg.com/media/Ca3gxgDWwAAKn_7.jpg:large

 

[Qwerty]

230mm is a whopping big blade in an angle grinder . Toolstation sell this 115mm blade which is nearly identical.....probably a fraction of the cost too!!!

 

[Bill]

--------

230mm is a whopping big blade in an angle grinder . Toolstation sell this 115mm blade which is nearly identical.....probably a fraction of the cost too!!!
View attachment 80035

Other sizes are available................. and have you never used a 9inch grinder?

 

[Qwerty]

--------

Other sizes are available................. and have you never used a 9inch grinder?

I have.....near on impossible to control any changes of direction or curves

 

[White Room]

9 inch grinder bit of an over kill....

 

[Bill]

9 inch grinder bit of an over kill....

Not when cutting 30 to 40mm granite or other stone......... This is not DIY tiling.

 

[Qwerty]

Correct me if I'm wrong @Tom Astley but isn't this thread about cutting stainless steel capped tiles not granite? In this circumstance the large blade is overkill

 

[Old Mod]

Correct me if I'm wrong @Tom Astley but isn't this thread about cutting stainless steel capped tiles not granite? In this circumstance the large blade is overkill

Yeah.... Way..... haha

 

[hmtiling]

MC500 (500mm Hard Materials Diamond Blade)
What about this Tom?

 

[Bill]

Correct me if I'm wrong @Tom Astley but isn't this thread about cutting stainless steel capped tiles not granite? In this circumstance the large blade is overkill

If you bother to read the post - it does say other sizes available - that image was just the one supplied by Rubi........ jeeeesh!

 

[Bill]

MC500 (500mm Hard Materials Diamond Blade)
What about this Tom?

Yep, used one that size too but I had to alter my grinder to make it fit..........

 

[Qwerty]

If you bother to read the post - it does say other sizes available - that image was just the one supplied by Rubi........ jeeeesh!

"Ey Ey, calm down, calm down!"

You were the one who stepped up last night and went off topic talking about thick granite! A simple reply about the different sizes would have been an appropriate response yesterday, not some 24 hrs later after we've all had a pop at one another!!
Oh you've got to love this forum lol! 😉

 

[Bill]

"Ey Ey, calm down, calm down!"
View attachment 80054

You were the one who stepped up last night and went off topic talking about thick granite! A simple reply about the different sizes would have been an appropriate response yesterday, not some 24 hrs later after we've all had a pop at one another!!
Oh you've got to love this forum lol! 😉

Look at the post YESTERDAY...........it mentions different sizes..........not 24 hrs later at all.

 

[Qwerty]

Hahaha, so you did! You started talking about granite and 9" blades not being DIY though. This became the focus of my confusion. I'm off to have a strong coffee! 😀