Discuss Tile Adhesive Compatible With Fish Ponds (non toxic to fish) in the The Welcome Forum area at TilersForums.com.

D

Dobbslc

Emmeti manifold to new radiators. Discussion Thread

Hi I'm I've just joined and hope to gain some well needed knowledge! I'm replacing the old 1 pipe heating system in my house as its very old and full of leaks! We're putting down a solid wood floor so I don't want any joints under it that might fail!
I'm thinking of using the Emmeti manifold system for wall hung radiators but can't decide what pipe to use. I could use their own Gerpex pipe but its 16mm and I don't think it'll connect to "standard" rad valves or can I use 15mm pex pipe? Their tech guy that I spoke to said it had to be 15mm with a 1.7mm wall thickness, what 15mm pipe can I use?
Thanks!

Emmeti manifold to new radiators. for the original thread on Plumbers Forums
 
I want to install some tile adjacent to outdoor fish ponds. This will be installed on wood, so I want to use S2 (high deformability) adhesive. Which type of adhesive would be least toxic to the fish (Type C - cement based, Type D - Dispersion, Type R - Resin). Also, which particular manufacturer/brand would be suitable for this application?
 
I want to install some tile adjacent to outdoor fish ponds. This will be installed on wood, so I want to use S2 (high deformability) adhesive. Which type of adhesive would be least toxic to the fish (Type C - cement based, Type D - Dispersion, Type R - Resin). Also, which particular manufacturer/brand would be suitable for this application?
For your outdoor fish pond project, Type D (Dispersion) adhesive is the least toxic option for the fish. Consider using brands like Mapei or Sika, which offer high-quality, fish-safe adhesives suitable for such applications.
 

Reply to Tile Adhesive Compatible With Fish Ponds (non toxic to fish) in the The Welcome Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hello, Novice DIY tiler here looking for advice please. I'm replacing tiles in very small...
Replies
1
Views
361
    • Like
I'm having a nightmare trying to establish product info from distributors. For example...
Replies
0
Views
1K
Just seen Rocatex on uHeat.co.uk and thought hmmm that's a new one on me. Anybody used it yet...
Replies
3
Views
2K
Hi I asked the Wunda technical department if I can just use a Ditra mat only and not the SLC...
Replies
12
Views
3K
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid...
Replies
2
Views
2K

Advertisement

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.5%
  • Kerakoll

    Votes: 17 10.3%
  • Ardex

    Votes: 12 7.3%
  • Mapei

    Votes: 46 27.9%
  • Ultra Tile

    Votes: 21 12.7%
  • BAL

    Votes: 39 23.6%
  • Wedi

    Votes: 4 2.4%
  • Benfer

    Votes: 4 2.4%
  • Tilemaster

    Votes: 22 13.3%
  • Weber

    Votes: 19 11.5%
  • Other (any other brand not listed)

    Votes: 17 10.3%
  • Nicobond

    Votes: 8 4.8%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 3.0%
Top