Discuss Tiling Mosaics in the Australia Tiling Forum area at TilersForums.com.

G

gordybaillie

Hi

I have just joined the site having completed a 4 week course to gain a City and Guilds Level 1 certificate and have done a couple of small jobs since - one which involved fitting a mosaic border.

I had a bit of difficulty with this as when applying the mosaic sheet border to the adhesive on the wall the adhesive would come through between each small mosaic therefore making it almost impossible to grout - is there a simpler way of doing this?

Then when you come to grout the mosaic how do you finish these off?

Thanks in advance for any help!
 
O

Old Mod

Hi and welcome to the forum Gordy!

When fixing mosaic, depending on their thickness, u'd normally use a much smaller notched trowel, something around 4mm.
Deep enough to give a bed but not as deep as the thickness of the mosaic, this should keep your adhesive low enough.
If adhesive does come through, then it needs to be raked out before grouting.
I'd want to do that the same day, when adhesive has grabbed but not cured, next day is much harder.
You'd grout mosaic like any other tile, there's just more joints!
 
I

Italy

Hi

I have just joined the site having completed a 4 week course to gain a City and Guilds Level 1 certificate and have done a couple of small jobs since - one which involved fitting a mosaic border.

I had a bit of difficulty with this as when applying the mosaic sheet border to the adhesive on the wall the adhesive would come through between each small mosaic therefore making it almost impossible to grout - is there a simpler way of doing this?

Then when you come to grout the mosaic how do you finish these off?
you started right away into fifth gear!!!!! good and welcome tf :)

Thanks in advance for any help!
you started right away into fifth gear!!!! good and welcome tf :)
 

bansko

TF
21
188
Gordy, if it's something like a mosaic border and your using a cement based adhesive you have the option to mix a small amount of whatever grout you are using and using your squeegee spread a thin layer over the mosaic then fix it. That eliminates any adhesive showing through, if there's enough grout on you can basically grout it as you go. You will find it works perfect.
 
M

MTiler

depending on thickness of mosaics it is possible to get 3mm trowels.
If the mosaics are thinner than the field tiles and its a narrow border just fix the mosaics to a correct thickness backerboard first, which makes it less fiddly. When theyve cured just fix the board into the gap for the border.
 
O

Old Mod

I'm sure that backing mesh has its advantages, but if I was learning to fix mosaic, I'd want to do it without an aid.
My guess is you're not always gonna be in a position to use it, I'm sure it'll be cost prohibitive at times.
And if u've only ever used the mesh, surely it's gonna be a much more difficult task without.
I've never used it so I can't really comment I suppose, but last time I looked it was around a £1 a sheet, that's gonna add £11 a metre!
 

peteablard

TF
Arms
692
1,058
Cheshire
I'm sure that backing mesh has its advantages, but if I was learning to fix mosaic, I'd want to do it without an aid.
My guess is you're not always gonna be in a position to use it, I'm sure it'll be cost prohibitive at times.
And if u've only ever used the mesh, surely it's gonna be a much more difficult task without.
I've never used it so I can't really comment I suppose, but last time I looked it was around a £1 a sheet, that's gonna add £11 a metre!

I've used it a few times, it was only for packing out borders so not many sheets were needed which makes it low cost. You wouldn't want to use them for doing full walls as it eliminates the option to slice through the mesh and adjust sheets to line up better
 

Reply to Tiling Mosaics in the Australia Tiling Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

I’ve got a job using marble geometric mosaics about 10 mm thick. I’ve tried several blades to...
Replies
3
Views
878
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully...
Replies
6
Views
2K
Hi All Had a panic when we had to rip out some of our floor tiles after a plumbing leak...
Replies
0
Views
372
    • Like
After annoying the guys in my local CTD for about an hour looking at samples and agonising on...
Replies
3
Views
2K
Hello, Just joined the forum and am hoping to get some advice on a project. I live in San...
Replies
2
Views
4K

Advertisement

Thread Information

Title
Tiling Mosaics
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
12

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.1%
  • Kerakoll

    Votes: 14 9.5%
  • Ardex

    Votes: 11 7.4%
  • Mapei

    Votes: 44 29.7%
  • Ultra Tile

    Votes: 17 11.5%
  • BAL

    Votes: 35 23.6%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 21 14.2%
  • Weber

    Votes: 18 12.2%
  • Other (any other brand not listed)

    Votes: 15 10.1%
  • Nicobond

    Votes: 7 4.7%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.7%
Top