Tiling over polished plaster and concrete

[cbmltd]

Starting a job monday and need some advice.
bathroom has polished concrete wetroom floor and polished plastered walls,

I dont think the walls will be a problem as can probably ruff these up but the floor has been painted and probably resin underneath

Anyone got any advice on adhesive to use or will i need to remove surface first.If so any recommendations on tools or liquids to get the surface ruff to get a decent key with the adhesive?

What would be the best primer over the top in the ideal situation?

Havent seen the job yet so in the dark myself really :yikes:
Any advice would be appreciated

Thanks

 

[Time's Ran Out]

Suppose it's all finished by now!

 

[cbmltd]

No lol
Scratched my eye beginning of week
So any advice appreciated

 

[Dave]

A slurry coat on the floor ..

Is is there a former installed or has the screed falls to drain ?

 

[cbmltd]

Wax coat on walls
Used norcross on walls today had no issues after roughing walls up and using a decent primer
Floor isn't concrete,was fibreglass over ufh topped with a solid resin ?
It was already a wet room but customer didn't like the finish.
I've cut the turned floor out around the edges and retanked and self levelled with latex the remainder of the floor up to the point of wetdeck
Tiling floor tomorrow will update as progresses

 

[WetSaw]

No lol
Scratched my eye beginning of week
So any advice appreciated

Advice.......
Keep your fingers out of your eyes?