tiling window reveals.

[danmasey]

Any advice on how to stick the beads. Especially if your not tiling the reveals for a bit after. Do you just place a bit of adhesive on the "flange".

Also, for 8mm tiles would you go any bigger than 9mm beading?

 

[Ian]

Yeah just push them into a bit of adhesive then tile into them, no need to let it set. I suppose you could do it with rapid set and tile it a couple of hours later, not something I've ever done though.

 

[smidy69]

Do people push the trim into the reveals or into the wall sides? (if that makes sense)..... I normally tile the walls first and place beading into wall sides so my beading is done before the reveals are tiled. I can never judge how much of a over lap to bring out over the window reveal. I often overlap too much and end up packing out the reveals too much.

would always tile into cills and reveals, never even heard or seen it done on the wall side to be honest.

 

[charlie1]

I used to do it in the wall side when using quad trims. Last piece would be placed in then tiled, i felt it actually gave a more stable set up, once it was in there was minimum detailing to get perfect then it was locked in.