H
Here to learn!
Thank you for your time.....
I have a customer who has very un-even floor boards. She wants to use electric heat membrane and travetine tiles.
IF i am to take this on obviously I want to make sure it is done correctly and I have had varying levels of advice, so time to ask the professionals!
My thoughts are to;
(1) remove all floor boards.
(2) Lay 18mm thick marine ply, screwed at 150-200mm intervals...
(3) do I now lay de-coupling membrane, do I lay tile backer board, do i lay Wedi board?
(4) heat membrane goes down
(5) 2 part flexi
(6) tiles
I am out of my comfort zone on this one and would appreciate any opinions / advice at all.
Thanks again for your time
I have a customer who has very un-even floor boards. She wants to use electric heat membrane and travetine tiles.
IF i am to take this on obviously I want to make sure it is done correctly and I have had varying levels of advice, so time to ask the professionals!
My thoughts are to;
(1) remove all floor boards.
(2) Lay 18mm thick marine ply, screwed at 150-200mm intervals...
(3) do I now lay de-coupling membrane, do I lay tile backer board, do i lay Wedi board?
(4) heat membrane goes down
(5) 2 part flexi
(6) tiles
I am out of my comfort zone on this one and would appreciate any opinions / advice at all.
Thanks again for your time