T
TheRealRobG
I had a seemingly never-ending bathroom DIY experience which lasted several weeks from planning to (almost) completion. My first ever bathroom installation and tiling job - and probably my last for a good few years, too!
I couldn't have done it without the generous advice I got from this forum, so thanks to everyone here for kind help and guidance. It made all the difference!
Took a few piccies while I was doing it, and thought I might share them on here. I don't get much appreciation from the wife about what's involved anyway...
As you can see, it started off as a pretty hideous 1980s style bathroom with corroded gold finish fittings and a nasty green carpet. I thought the tiles were salvageable, but the wife thought otherwise, so rip 'em all out I did!
Unfortunately off with the tiles came most of the plasterboard, so I had to replace that, which took - bloody ages! I decided to use Aquapanel for most of the critical sections around the bath, toilet and shower.
For the shower I ran a sheet of polythene behind the Aquapanel and ran that down into the tray in front of the upstand to catch any stray moisture. I had to construct a basin support and toilet cistern box from scratch. I used a Geberit WC frame for the suspended toilet.
I couldn't have done it without the generous advice I got from this forum, so thanks to everyone here for kind help and guidance. It made all the difference!
Took a few piccies while I was doing it, and thought I might share them on here. I don't get much appreciation from the wife about what's involved anyway...
As you can see, it started off as a pretty hideous 1980s style bathroom with corroded gold finish fittings and a nasty green carpet. I thought the tiles were salvageable, but the wife thought otherwise, so rip 'em all out I did!
Unfortunately off with the tiles came most of the plasterboard, so I had to replace that, which took - bloody ages! I decided to use Aquapanel for most of the critical sections around the bath, toilet and shower.
For the shower I ran a sheet of polythene behind the Aquapanel and ran that down into the tray in front of the upstand to catch any stray moisture. I had to construct a basin support and toilet cistern box from scratch. I used a Geberit WC frame for the suspended toilet.