TX 700 cutting out of square

[twouptwodown]

Hi all, my first post.

On Monday bought a new TX 700, fantastic bit of kit, but have noticed that it is cutting out of square with the guide set at 0 degrees. We are talking 2mm out on a 600mm tile.

First noticed as the scribing wheel does not run parallel with the breaking bar on the base.

Having not had a great deal of familiarity with Rubi cutters, is there any adjustment on the cutter or is it a case of taking the cutter back and getting a replacement?

Thanks, Michael.

 

[DHTiling]

Hello michael and welcome...there should be a small threaded screw at the back to fine adjust the fence setting...

 

[twouptwodown]

Thanks, will have a look tomorrow.