Uncoupling Adhesive for a porcelain floor.

[2020Tiling]

Anyone recommend a fair priced adhesive to use on a half wood half concrete floor over layed with either ditra or similar uncoupling membrane. Tiles are Glazed porcelain

 

[Andy Tiler]

I would use Tilemaster ultimate!
But make sure you put a movement joint where the 2 substrates meet and also cut the ditra!!
Hope that helps

 

[DHTiling]

What type of wood substrate.?

 

[2020Tiling]

Ply substrate. No movement in floor at all. Could I not just over board the whole floor with 1 big sheet of 6mm hardy ?

 

[DHTiling]

Ply substrate. No movement in floor at all. Could I not just over board the whole floor with 1 big sheet of 6mm hardy ?

If the floor is equivalent to say a 1500x900 sheet of Hardi but most are now 1200x800.

 

[area tiling]

I'd agree with Andy above and use weber addy!

 

[tilerbarry]

Clean & dust free both floors, Mapei Keraquick adhesive mixed with Mapei Latexplus troweled onto floor to stick Mapetex anti fracture membrane to wood and concrete, leave for a couple of hours then stick your tiles onto the Mapetex with Mapei Keraquick adhesive mixed with Mapei Latexplus. They do a flexible grout called Ultracolourplus aswell in 27 colours which you mix with water.

 

[tilerbarry]

Keraquick and latexplus with mapetex anti fracture membrane for me every time.