what are we all working at next week !!! then

[Diamond Pool Finishers]

me and tom will be rendering and screeding a swimming pool at Huntington in Cambridge, outdoor under a tent, next to a great big lake ,i have booked the B&B £50 for a twin on a farm van is packed three hour drive :yikes:

 

[The Legend; Phil Hobson RIP]

Still a the same big domestic Dave. I have a 50m floor to fit in starting wed, then back to big job

 

[richard Kent]

I've got to go up that way next week end, St Neots to look at a kitchen.

 

[Rob Z]

Dave, we're still on that big renovation in Washington DC. I'm pushing hard to get ready by the end of the week for all the concealment inspections. Soon we'll be ready to start setting tile in the kitchen, three bathrooms, breakfast room, and an entryway.

 

[nybor62]

pub refurb about 100m2, then about 70 m2 walls and floors for the QS of a local construction company, all local work

 

[DHTiling]

I start a big stone job..

Mocca travertine 900x450 brushed finish..

over 200 mtrs .. full ground floor of a bungalow and 3 bathrooms in the same stone, all random bond..

The whole floor is wet ufh..

 

[doug boardley]

hopefully I'll be on my hols!!:8::8:

 

[DHTiling]

I start a big stone job..

Mocca travertine 900x450 brushed finish..

over 200 mtrs .. full ground floor of a bungalow and 3 bathrooms in the same stone, all random bond..

The whole floor is wet ufh..

well.. i had a horrible thought whilst i typed this^^^^^

So i checked my hunch with the customer and i was right...:yikes:

The wet UFH is not connected and has not been commissioned ..

so no mapetex can be laid or stone..:mad2:.. so at present i am back to the chip shop instead.

 

[richard Kent]

Doug have a goodun, I'm not away untill Oct 9, can't wait

 

[Rob Z]

well.. i had a horrible thought whilst i typed this^^^^^

So i checked my hunch with the customer and i was right...:yikes:

The wet UFH is not connected and has not been commissioned ..

so no mapetex can be laid or stone..:mad2:.. so at present i am back to the chip shop instead.

Dave, is this the one with the stench problem? :yikes: Hateful!

 

[DHTiling]

It is Rob.. but the smell has gone now after i cleaned it all out... binned the lot..:lol:

 

[doug boardley]

well.. i had a horrible thought whilst i typed this^^^^^

So i checked my hunch with the customer and i was right...:yikes:

The wet UFH is not connected and has not been commissioned ..

so no mapetex can be laid or stone..:mad2:.. so at present i am back to the chip shop instead.

is that Mapei's own decoupler Dave? and do you lay it in the conventional way?

 

[DHTiling]

It is yes doug.. stuck down the same as any other membrane... but it isn't water proof etc.. just an uncoupler..

It is the one i showed being used in the pws showroom thread..

 

[Ajax123]

Gyvlon Gyvlon and more Gyvlon.......oh and my expenses for the month.......

 

[SandyFloor]

I'm just sitting listing all the little jobs I said I would 'squeeze in.' when I could. They add up to about 2 1/2 weeks work. I think I need to make a point of programming even the little jobs in.