- Thread starter Dave
- Start date
- Replies 13
- Views 5K
Discuss What Can Dewalt Do For Tilers .? in the Australia Tiling Forum area at TilersForums.com.
A
Alan M
festool make a plunge angle grinder that runs on the trackA wet/dry cutter made in a similar fashion to a festool ts55 with a complete shroud for dry cutting, millimetre setting on cut depth, and mitre cutting.
.....and for the same money!
O
Old Mod
Is this it?
Diamond cutting system DSC-AG 125 FH-Plus 769954
Looks impressive I must say, I'd like something larger tho.
I have Rubi's TC180 and I'm very happy with it, it has its limitations tho, the main problems being insufficient dust extraction and no mitre facility.
I want something that can do this
For reasons I won't bore u with (not my floor tho) I was brought in to repair this floor, and part of that process was expose a broken UFH cable.
I managed to do most of the cut lines with my Rubi TC 180 and the depth gauge worked well but took time to set it accurately.
However, because it wasn't at full cut depth the shroud was not in the down position because it rises and falls with the blade.
This caused an enormous amount of dust that I couldn't control and this was a extremely valuable lived in property in Fulham, not ideal!
The rest I did with my Flex and dust extraction hose held separately, again not ideal, whilst the dust extraction was more successful I couldn't risk plunging too deep!
So I want something that will do the job, it needs next to perfect dust extraction, which can be accomplished with a fixed shroud, and something with millimetre perfect cut adjustment!
I don't think that's too much to ask for, do you?
Last edited by a moderator:
A
Alan M
Is this it?
Diamond cutting system DSC-AG 125 FH-Plus 769954
Looks impressive I must say, I'd like something larger tho.
I have Rubi's TC180 and I'm very happy with it, it has its limitations tho, the main problems being insufficient dust extraction and no mitre facility.
I want something that can do this
View attachment 73873
View attachment 73875
For reasons I won't bore u with (not my floor tho) I was brought in to repair this floor, and part of that process was expose a broken UFH cable.
I managed to do most of the cut lines with my Rubi TC 180 and the depth gauge worked well but took time to set it accurately.
However, because it wasn't at full cut depth the shroud was not in the down position because it rises and falls with the blade.
This caused an enormous amount of dust that I couldn't control and this was a extremely valuable lived in property in Fulham, not ideal!
The rest I did with my Flex and dust extraction hose held separately, again not ideal, whilst the dust extraction was more successful I couldn't risk plunging too deep!
So I want something that will do the job, it needs next to perfect dust extraction, which can be accomplished with a fixed shroud, and something with millimetre perfect cut adjustment!
I don't think that's too much to ask for, do you?
not far off Diamond cutting system DSC-AG 125 - DSC-AG 125 Plus
that works on a rail
Last edited by a moderator:
Diggy
TF
O
Old Mod
Some dewalt related products on offer here: Dewalt Power Tool Accessories - Power Tools & Accessories
W
White Room
Bet thats a chuncky price...
O
Old Mod
Last edited by a moderator:
W
White Room
Not as bad as I thought...
Last edited by a moderator:
A
Aston
Dewalt have scraped the hand held wet saw, the dwc410.
That was a good saw, it just needed a bit more time and exposure.
Cost effective saw, just needed a rail and a few little tweeks and it would have been an essential tool for every tiler.
Maybe dewalt could look at doing a decent wet table saw too.
That was a good saw, it just needed a bit more time and exposure.
Cost effective saw, just needed a rail and a few little tweeks and it would have been an essential tool for every tiler.
Maybe dewalt could look at doing a decent wet table saw too.
Reply to What Can Dewalt Do For Tilers .? in the Australia Tiling Forum area at TilersForums.com
There are similar tiling threads here
Bathroom/bathtub walls were tiled to the ceiling and a shower screen was fitting. Tiler left...
- Locked
I think this is okay to do. I can't see this upsetting a relationship you have. But by all means...
I’m thinking about compiling a list/checklist for prospective customers to ask their Tilers...
To tiling contractors that hire tilers, where do you advertise to find tilers to fill the rolls...
- DanEwen
- Canada Tile Advice
- 43
- 8K
Due to a set of unforeseen circumstances in my life i'm having to completely reassess my...