Discuss what do you recommend. in the Australia Tiling Forum area at TilersForums.com.

Andy Allen

TF
Esteemed
Arms
18,290
1,318
Gloucester
I bought a titan one from screwfix it was on offer for £40 I had 3 floors to rip up and thought if it lasted long enough for that then I got my money worth ...

7years later...and hundreds of meters of floors ripped up its still going strong.....so do you really need to spend so much money?
 
H

Handyeire

Any particular reason for a 110v rather than a 240v...

Not aloud near site with 240v here in south.

I bought a titan one from screwfix it was on offer for £40 I had 3 floors to rip up and thought if it lasted long enough for that then I got my money worth ...

7years later...and hundreds of meters of floors ripped up its still going strong.....so do you really need to spend so much money?


At that money and length of time, that's a steal thou I'm looking something make from dewalt or makitka.
 
S

Stef

I bought a Makita sds + when the Dewalt packed in, not sure model number but got it for £100 on offer at ScrewFix.
Like Andy I bought a cheap Titan percussion drill to mix adhesive to get me by & it lasted almost 2 years. I gave it some amount of abuse & don't know how many bags of addy it mixed up.
Had a 2 yr warranty so took it back & got a new one, not as well built as the old one but it does me for £40.
 
M

mike1979

I bought a titan one from screwfix it was on offer for £40 I had 3 floors to rip up and thought if it lasted long enough for that then I got my money worth ...

7years later...and hundreds of meters of floors ripped up its still going strong.....so do you really need to spend so much money?
I've got the Titan 110 v sds max had it a year , powerful and does the job great cost me around a hundred quid
 

Attachments

  • image.jpg
    6.8 KB · Views: 147
L

lizzardtong

I would advise on getting 2 drils.
On for drilling with sds plus like that http://www.toolstation.com/m/part.html?p=16953

And for stripping tiles smallest braker from hilti TE500 with sds max fitting. Its not to hevy under 5kg and bulletproof.

With combi drills i found that they are not accurate try to drill 5mm holes with titan. Its possible but it will take time. As for stripping i foun that it takes air from the bottom of engine and it ectract it trough sides so if you will be chiseling wall on a face hight you will have air blowing dust in your face. I do have dewalt sds max and it works other way around. Other thing is that it will be more powerful that combo drill. So you will be quicker.
 
T

TJ Smiler

All my tools are Makita 18v cordless, i can't fault any of them................. But these are tools that i would use on every single job. My SDS that i did have was the Titan (pictured above) heavy brute but i didn't use it no where near as much as my other tools so no point in spending on it. I also had an Hitachi sds but the chuck broke on it after 3 uses!
 

Reply to what do you recommend. in the Australia Tiling Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi, Just wondering what the general consensus is with grout for a shower. I have epoxy grouted...
Replies
0
Views
744
Hi all , it’s been years since last posted for advice and your methods . My question is this ...
Replies
5
Views
867
    • Like
Hi, I'm wondering what, as a tiler, you would expect to do when you go to a job. Do you prepare...
Replies
1
Views
2K
I'm looking for solid answer or opinion. We had some windows removed on an exterior wall and...
Replies
1
Views
2K
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill...
Replies
1
Views
1K

Advertisement

Thread Information

Title
what do you recommend.
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
12

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 5 4.7%
  • Kerakoll

    Votes: 8 7.5%
  • Ardex

    Votes: 6 5.6%
  • Mapei

    Votes: 29 27.1%
  • Ultra Tile

    Votes: 14 13.1%
  • BAL

    Votes: 27 25.2%
  • Wedi

    Votes: 3 2.8%
  • Benfer

    Votes: 2 1.9%
  • Tilemaster

    Votes: 19 17.8%
  • Weber

    Votes: 18 16.8%
  • Other (any other brand not listed)

    Votes: 13 12.1%
  • Nicobond

    Votes: 5 4.7%
  • Norcros

    Votes: 3 2.8%
  • Kelmore

    Votes: 1 0.9%
Top