what manual tile cutter for starting out?

[Neil2135]

Hi as the title says, what would everyone recommend as a good tile cutter for someone just starting out?

Many thanks

 

[Tony_C]

Hello and welcome Neil 😁.

Without starting a brand war I'd say Sigma 3C3M is a good all rounder. 72.5cm cutter so should cover most bases and with the push scribe be a bit easier to use.

You will soon get fed up using that size cutter for metro tiles though.

 

[Neil2135]

Hello and welcome Neil 😁.

Without starting a brand war I'd say Sigma 3C3M is a good all rounder. 72.5cm cutter so should cover most bases and with the push scribe be a bit easier to use.

You will soon get fed up using that size cutter for metro tiles though.

Thanks I'll check them out.

 

[GoneGuy]

Montolit masterpiuma 63p push cutter.

 

[Dumbo]

Go to somewhere that you can have a go with some cutters and buy the one you like , but get a proper one sigma,monti ,rubi , because if you get a cheap one you will end up buying a better one sooner or later.