M
mrgdclark
I'm laying my 1st polished marble floor for my sister and need some advise. She has a new screed floor (been down about 2 months) and has wet underfloor heating installed which has been on up until a week ago and is perfectly level with no joins / cracks in it. the tiles are 600 x 600 x 12mm polished marble and the room is approx 7.1m x 4.6m.
1. what trowel size do i need. adh is powder flexible for underfloor heating
2. what spacer size should i use.
3. do you just "drop" the tile into place and tap it down?
4. do i need to treat the screed floor with anything?
5. do i give the tiles a 1st "seal" after i have put them down and before i grout and then reseal them after i have grouted?
i will be leaving a gap around the edge of approx 8 - 10 mm as i'm going to use the same tile as skirting.
many thanks for any advise
1. what trowel size do i need. adh is powder flexible for underfloor heating
2. what spacer size should i use.
3. do you just "drop" the tile into place and tap it down?
4. do i need to treat the screed floor with anything?
5. do i give the tiles a 1st "seal" after i have put them down and before i grout and then reseal them after i have grouted?
i will be leaving a gap around the edge of approx 8 - 10 mm as i'm going to use the same tile as skirting.
many thanks for any advise