Discuss Where to start with a straight herringbone pattern in the America Tile Forum / Advice Board area at TilersForums.com.

Hi,
Im tiling the bottom third of the bathroom wall in a straight herringbone (where the tiles are horizontal and vertical rather than on a 45 degree). Im just wondering where to start to make sure the patter doesnt look odd, start in the middle as normal and work out or start in the top corner and have the smaller cuts on the bottom?
Also I need to go around a window reveal and a internal corner so wondering how the pattern carries on around these types of corners. The tiles im using are 300x100 so theres 3 vertical tiles to each horizontal rather than the usual 2 too.

I have searched the forum for 'herringbone' but only one result came up and google isnt much help with the straight pattern either.

thanks in advance.
Paul
 

GAZ5518

TF
Esteemed
Arms
142
558
EPSOM
Hi,
Im tiling the bottom third of the bathroom wall in a straight herringbone (where the tiles are horizontal and vertical rather than on a 45 degree). Im just wondering where to start to make sure the patter doesnt look odd, start in the middle as normal and work out or start in the top corner and have the smaller cuts on the bottom?
Also I need to go around a window reveal and a internal corner so wondering how the pattern carries on around these types of corners. The tiles im using are 300x100 so theres 3 vertical tiles to each horizontal rather than the usual 2 too.

I have searched the forum for 'herringbone' but only one result came up and google isnt much help with the straight pattern either.

thanks in advance.
Paul
02A5C7B7-F5FF-45BC-A982-862095EFD7F7.jpeg

is this the look that you want to achieve?
if so center wall….. working from top line down…. Turning pattern in corners….
Hope that makes sense
G.
 

Reply to Where to start with a straight herringbone pattern in the America Tile Forum / Advice Board area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi All I am after some advice please. We have a retrofit undefloor heating system ( Robbens...
Replies
8
Views
4K
Hi all, I've had a go at tiling our cloakroom loo and its going ok, (I am extremely slow, it...
Replies
2
Views
3K
All, I have 600mm by 300mm porcelain tiles for the shower area. The girlfriend wants a vertical...
Replies
5
Views
1K
I'm currently on a DIY project.redoijg my bathroom. So far I've built a bath surround and tiled...
Replies
0
Views
1K
    • Like
I've committed to my first 450 herringbone job - will be 3 walls of a shower enclosure with...
2 3 4 5 6
Replies
87
Views
71K
Weston
W

USA Tile Forum Popular

America Tile Advice Trending

Advertisement

Thread starter

Joined
Location
Aberystwyth
What member type are you?
  1. DIY Wall and Floor Tiler

Thread Information

Title
Where to start with a straight herringbone pattern
Prefix
N/A
Forum
America Tile Forum / Advice Board
Start date
Last reply date
Replies
2

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.2%
  • Kerakoll

    Votes: 13 8.9%
  • Ardex

    Votes: 11 7.5%
  • Mapei

    Votes: 44 30.1%
  • Ultra Tile

    Votes: 17 11.6%
  • BAL

    Votes: 34 23.3%
  • Wedi

    Votes: 3 2.1%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 20 13.7%
  • Weber

    Votes: 18 12.3%
  • Other (any other brand not listed)

    Votes: 15 10.3%
  • Nicobond

    Votes: 7 4.8%
  • Norcros

    Votes: 3 2.1%
  • Kelmore

    Votes: 4 2.7%

Birthdays

Top