Which mapei addy for basazza glass mosaics

[peckers]

Hi peeps, I have a job installing Basazza glass mosaics they are 10mm paper faced on a 300x300 sheet. the specs are to use mapei addy and Basazza are supplying there own grout.
I am tiling onto wedi board and it is in a wet room!
I havent used much mapei as its not that readily available down here so which addy would you reccomend?
thanks in advance...

 

[Gazzer]

http://www.mapei.com/public/US/products/AdesilexP10_TDS_EA.pdf

http://www.mapei.com/GB-EN/product-detail.asp?IDProdotto=110&IDTipo=1611&IDLinea=1

 

[peckers]

http://www.mapei.com/public/US/products/AdesilexP10_TDS_EA.pdf

WOW that was quick

 

[Gazzer]

Nice to use brilliant white adhesive .

 

[peckers]

Looks like P10 with the keraply additive as its got more body jets that you can shake a stick at and its got a waterfall in the wet area too!!! oh and the Basazza mosaics are being made especially with a persons head and face murial in it !!!

 

[Aston]

hi steve
adesilex p10 as neale mentioned but i have used keraquick white, with latex plus in the past and mapei have said that was adequate so its an alternative if you have and bags of keraquick in storage!

 

[Alberta Stone]

Nice job P....will be looking for pics as you go.

 

[peckers]

Nice job it shall be. the panel murial in the book is approx £5000, but as its being altered/changed to suit the customers requirements its gonna cost near the £8,000 mark for just one panel thats with out the rest off the walls :drool5:

So theres absoloutley no pressure in getting this absoloutley perfect :lol: none at all :mad2:

oh and I hate paper faced mosaics at the best off times :incazzato:

Now this is just the shower wall areas that is being done in this and the rest off the floors are in limestone with a big mixture of pebbles in the floor too!

This is going to be a long job as there is shapeing and bull nosing to be done..

This will be good for my portfolio :drool5:

 

[The D]

p10 is amazing adhesive you will love it. sounds like a nice job:drool5:

 

[ukProTile]

That should be fun!

I take it you will be smoothing over the screw/washer plates in the wedi.
Better hope the joints are 100% flush!

 

[Diamond Pool Finishers]

cant wait to see the pic's peck's

 

[peckers]

will take pics as i go and will post them when the job is under way!!

 

[peckers]

That should be fun!

I take it you will be smoothing over the screw/washer plates in the wedi.
Better hope the joints are 100% flush!

The joints will be flush as im installing the wedi and doing the prep myself! all screw and washers will be taped over using the wedi waterproof tape!

 

[Scott]

Sounds excellent and better than painting hey! Looking forward to another quality set of pics Steve