window ledge

[peterhouse]

Just a quick question i have a window ledge to tile it takes two 10cm tiles on the flat ledge but i have a quarter inch gap left over whichever way i put tiles,hopes this makes sense thanks for any suggestions

 

[faithhealer]

do you mean at the back between the tile and window frame, in which case if it was a white plastic frame I would buy a bit of trim, only a couple of quid

 

[peterhouse]

yes as you look out of the window the two tiles facing uppermost on the ledgeis where the gap is i do have a white frame window as well

 

[DHTiling]

What size cut do you have left and right of the cill and what size cut at the face of the cill..?.. you could always start with a half tile and give the wrapped effect if side cuts match..if you get my drift.

 

[faithhealer]

What size cut do you have left and right of the cill and what size cut at the face of the cill..?.. you could always start with a half tile and give the wrapped effect if side cuts match..if you get my drift.

logged that one dave, never done it that way on a sill......yet