W
Waluigi
Selco sells that trowel.
Search the forum,
Selco sells that trowel.
Quick update,
Eventually got the old plywood floor up what a headache it was to get up!!
Plumbing nearly done radiator pipes adjusted shower valve set up for soldering tomorrow,
Noggins marked out for floor.
Tomorrow will be spent fixing ply on to floor with rockwool acoustic insulation and fixing the wedi tray.
Discuss Retiling wetroom advice on how best to proceed in the Tanking and Wetrooms area at TilersForums.com.
Selco sells that trowel.
Eventually got the old plywood floor up what a headache it was to get up!!
Plumbing nearly done radiator pipes adjusted shower valve set up for soldering tomorrow,
Noggins marked out for floor.
Tomorrow will be spent fixing ply on to floor with rockwool acoustic insulation and fixing the wedi tray.
Hi all,
Just want to say thank you for all the help you guys have given soo far.
2 questions.
Do I need a uncoupling membrane on top of my plywood before I lay the 20mm wedi boards on floor? Floor is 2.5m x 3m?
My wedi bench is curved and it will be a nightmare to cut a curve on the tile slab. Can I put the put the wedi boards on wall. Seal the wall boards with the floor boards with tape and 610, then tile wall and put the the bench in last and seal with 610 and tile it and the floor?
Just want to say thank you for all the help you guys have given soo far.
2 questions.
Do I need a uncoupling membrane on top of my plywood before I lay the 20mm wedi boards on floor? Floor is 2.5m x 3m?
My wedi bench is curved and it will be a nightmare to cut a curve on the tile slab. Can I put the put the wedi boards on wall. Seal the wall boards with the floor boards with tape and 610, then tile wall and put the the bench in last and seal with 610 and tile it and the floor?
Hi all, this past week has been a emotional rollercoaster.
Bathroom is ready for tiling, wedi boards and tray installed. All corners and joints sealed.
Was going to start tiling this weekend. However we received some dreadful news, my sister has been diagnosed with a form off bone cancer.
Therefore all work has been postponed. Dad has now instructed me to get someone in ASAP to finish the job. We can’t afford to give it the time needed to get it done.
Anyone that can help out please message me. I based in Preston.
Bathroom is ready for tiling, wedi boards and tray installed. All corners and joints sealed.
Was going to start tiling this weekend. However we received some dreadful news, my sister has been diagnosed with a form off bone cancer.
Therefore all work has been postponed. Dad has now instructed me to get someone in ASAP to finish the job. We can’t afford to give it the time needed to get it done.
Anyone that can help out please message me. I based in Preston.
Last edited:
Yhep full service from Marlyn.
The niche lol. That was an original feature from the previous bathroom tiles in the existing gray tile.
Wife decided to make a feature so we retiled with the bronze slab. Tiled it straight on to the existing gray tile. But previously a chrome trim was used. But the new trim is all black. So we decided to use the black trim stuck it out a bit beyond the existing profile and filled it with black silicone.
The niche lol. That was an original feature from the previous bathroom tiles in the existing gray tile.
Wife decided to make a feature so we retiled with the bronze slab. Tiled it straight on to the existing gray tile. But previously a chrome trim was used. But the new trim is all black. So we decided to use the black trim stuck it out a bit beyond the existing profile and filled it with black silicone.
O
Old Mod
Reply to Retiling wetroom advice on how best to proceed in the Tanking and Wetrooms area at TilersForums.com
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.