What tile adhesive should I use for large porcelain tiles?

[Rae]

Ditra matt the floor you have the flatness as long as solid

 

[scottinnes]

Good luck 👍

Dave, do you recommend any adhesive suitable for 600x300 porcelain tiles on plasterboard which has a longer working life as the ‘BAL Rapid Flex One’ only have 30 minutes. Thanks

 

[Dave]

Dave, do you recommend any adhesive suitable for 600x300 porcelain tiles on plasterboard which has a longer working life as the ‘BAL Rapid Flex One’ only have 30 minutes. Thanks

I use weber set plus. Go bucket life.

 

[scottinnes]

I use weber set plus. Go bucket life.

It says application thickness is 3-6mm, am i not using 10mm notched trowel? cheers

 

[Dave]

It says application thickness is 3-6mm, am i not using 10mm notched trowel? cheers

That’s the finished tile adhesive depth once the ribs are compressed.

 

[scottinnes]

That’s the finished tile adhesive depth once the ribs are compressed.

Spot on, last question Dave haha. For trowel should U use 10mm square or 10x20mm U? (see link)

Vitrex 6, 10 & 20mm Combination Trowel 11 x 4¾" | Tiling Trowels & Spreaders | Screwfix.com

That is 10mm height x 20mm width and also 6mm high x 10mm wide. Would the 10mm height x 20mm width be suitable for my 300x600mm tiles on wall and 600x600mm tiles on floor? If not can you give suggets what type of trowel and what size please.

 

[Dave]

Spot on, last question Dave haha. For trowel should U use 10mm square or 10x20mm U? (see link)

Vitrex 6, 10 & 20mm Combination Trowel 11 x 4¾" | Tiling Trowels & Spreaders | Screwfix.com

That is 10mm height x 20mm width and also 6mm high x 10mm wide. Would the 10mm height x 20mm width be suitable for my 300x600mm tiles on wall and 600x600mm tiles on floor? If not can you give suggets what type of trowel and what size please.

All fine. 👍