Which is the Number 1 Best Tile Adhesive?

Search results for query: *

  1. peteablard

    20mm exterior porcelain cutting

    As Alan mentioned it's only really suitable for outdoor use due to the water feed running everywhere. That said some sort of tray system could be set up to catch the water but would need constant emptying. I only really need this for new builds I do for a builder where making a mess outside...
  2. peteablard

    20mm exterior porcelain cutting

    ThatsThats the red blade on the Flex Alan, can't tell it apart from the factory edge
  3. peteablard

    20mm exterior porcelain cutting

    Hopefully trying bthe black one on the Flex next week, will let you know how I get on. Have been more than happy with the red one so far
  5. peteablard

    20mm exterior porcelain cutting

    The 2 blades you sent me to test were both superb Alan. The quality and speed of both were superb on 20mm. I've also tested them on various other tiles and without a doubt they would be my first choice replacement s if you decide to stock them
  6. peteablard

    large format tile gaps

    I've just done 50m2 the same size and used 3mm. Tiles were perfect and could have done smaller but it's always nice to have some breathing space!
  7. peteablard

    Recommended cutter for 1200mm porcelain

    Lol, had a TX700 once and that was bad enough!
  9. peteablard

    Recommended cutter for 1200mm porcelain

    The problem is you need 18 people to carry the Rubi
  10. peteablard

    Porcelain grinder blades

    The red one is superb, I've tried the 115mm in my grinder and also the 160mm in my wet saw (Flex CS60) I've not had chance to try the black ones yet but hope to next week. They are being tested against the ATS 180mm continuous rim blade that I ordered with the saw on 20mm porcelain. Watch this...
  11. peteablard

    Which wet cutter to buy?

    Didn't get back to that job this week but will get some feedback to you ASAP Alan.
  13. peteablard

    Which wet cutter to buy?

    I got them too plus a couple of 160mm ones to test in the Flex CS60 wet saw I got from them a few weeks ago.
  14. peteablard

    best diamond disc to buy

    What are you using it in? Its designed for cordless grinders
  15. peteablard

    Multi room floor leveling

    I use plastic packers stuck down with Silicon.
  17. peteablard

    Applying primer methods

    Sponge for walls roller for floors
  18. peteablard

    Recommendations- The best knee pads???

    Alpro for me, I'm sure the others mentioned are just as good but these work for me so I stick with them.
  19. peteablard

    Finished Bathroom - Hexagonal Tiles

    Great job John. Just finished a 50m2 kitchen floor with something similar only they are fitting a wood floor up to it rather than plank tiles.
  21. peteablard

    20mm thick travertine tiles, m2 rate

    Need to check the requirements with regards to mechanical fixing if you're tiling walls 6 metres high
  22. peteablard

    Am I expecting too much?

    Hold some money back and he'll definitely make time rather than just try to!
  23. peteablard

    Am I expecting too much?

    He's done a poor job of washing it off but it's nothing that can't be sorted. It would have been a lot easier to do it right before it dried though! That internal corner should be siliconed and not grouted too
  25. peteablard

    Making the jump from domestic to commercial.

    I've done a lot of work for shop fitting firms over the years and have never had a serious problem with the programs they set. The decent ones have been doing it for years so know realistically how long things take. Occasionally there will be urgent ones that might need an extra man or 2 to push...
  26. peteablard

    Multi tool blades.........

    I've got a 110v Fein but going to sell it and get a cordless Makita. It only gets used for a few minutes at a time so 18v will be fine
TilersForums.com; Made BY Tilers FOR Tilers
UK Tiling Forum by Tilers Forums

Advertisement

Top