Which is the Number 1 Best Tile Adhesive?

Search results for query: *

  1. Andy Allen

    Waste water??

    find a thirsty Bush..
  2. Andy Allen

    Chipboard floor problem

    most flexible adhesive, and only one I would use is bal single part fast flex, grout with bal wide joint grout mixed with GT1 admix 50/50 with water...
  3. Andy Allen

    Acceptable standard

    guess you should of checked the work before you paid !!
  5. Andy Allen

    CaberFloor

    if it's a floating floor I wouldn't touch it, you will be in for a whole world of hassle in the months that follow job...
  6. Andy Allen

    client wont pay

    job looks rough imo. the way the tiles are set don't help. as boggs has said it's not a pro finish more DIY at best.
  7. Andy Allen

    CaberFloor

    is it a floating floor ???
  9. Andy Allen

    'No More Ply' on old floorboards...

    yes stagger them, it limits the stress points on the joins.
  10. Andy Allen

    'No More Ply' on old floorboards...

    definitely DON'T put the screws in when the adhesive has set, it needs to be screwed down while the adhesive is still wet...
  11. Andy Allen

    'No More Ply' on old floorboards...

    just tiled this floor, onto floorboards that were worse than yours using nmp... as it's all I could get during lockdown , and using the exact method I mention in my last post. the tiles were stuck down using bal single part fast flex, and grouted with bal wide joint grout with GT1 admix.
  13. Andy Allen

    'No More Ply' on old floorboards...

    can't say I'm a fan of nmp, brittle crap imo, hardie board is much better, but as you already have it I would ditch there adhesive and stick it down with tile adhesive ( not ready mixed) use a 10mm trowel and 25mm screws this should take up the bow in the floor boards.
  14. Andy Allen

    this is a dumb question

    I personally think it's a dumb question...
  15. Andy Allen

    How we all coping during lockdown.

    same, tiled an empty house this week, first job since lockdown, and I ache all over now..lol. still struggling to get materials, but thinking of going back full time once the local suppliers re-open. will know more Sunday about the lockdown, hopefully it will be eased up a bit, still...
  17. Andy Allen

    Opus Pattern Question

    I do all my multi tile patterns by eye, no need for spacers, some joints may vary slightly, but the overall effect looks fine.. chipped edage travertine doesn't need a grout joint...???? don't know where you got that o e from.....
  18. Andy Allen

    Nightmare Tile Floor - Advice Needed

    I suspect you have no damp course under the quarry tiles and you should not have tiled on top of them...
  19. Andy Allen

    Tiles cracked again

    could be to much movement in the floor and cheap ceramic tiles..
  21. Andy Allen

    1 time use tile cutter

    cheap grinder and decent blade would do the trick...
  22. Andy Allen

    How to raise this sub floor?

    I'd use insulation boards too...
  23. Andy Allen

    Tile on to chipboard floorboards

    how does that stuff compare to bal single part fast flex..??
  25. Andy Allen

    Tile on to chipboard floorboards

    I would over board with cement boards rather than use ditra Matt, that way you can stick it down with adhesive and screw it down, you will be surprised how much it will stabilise the floor to give you the perfect tiling surface as opposed to using a decoupling matt which will only help with...
  26. Andy Allen

    Plank tiles setting out

    :) metros and planks, nothing else...:)
TilersForums.com; Made BY Tilers FOR Tilers
UK Tiling Forum by Tilers Forums

Advertisement

Birthdays

Top