chipboard

  1. S

    Why Adhesive Back Of Hardiebacker Type Boards Over Chipboard?

    Hi all, I've researched and researched on the best thing to do when tiling my bathroom floor. The floor is T&G chipboard, the green stuff (property about 18yr old), and is pretty sound in my opinion. I was going to ditra matt over it but some tilers i've had over some said thats fine, some...
  2. M

    Tiles On Chipboard

    Here's a bathroom I ripped out recently, the floor was chipboard and hardboard, completely soaked through and leaked through causing a huge hole in the ceiling below. Why do people do it?! Ended up replacing the entire floor with 25mm WBP ply.
  3. M

    Tiling Onto Uneven Concrete/bitumen Floor

    Problem: Tiling a kitchen floor. Half is covered in bitumen (from parquet floor). Half is a new concrete slab. There is a 35mm level difference across the floor and is fairly lumpy. Possible solution No.1?: Use latex self-levelling compound such as arditex na. BUT: I am slightly worried...
  4. A

    Tiling Bathroom Chipboard Floor Floor

    Hi, I was told that the bathroom chipboard floor has to be laid with plywood of at least 9 mm thick, before tiles are laid. In my mother's house some ago the bathroom chipwood floor was overlaid with 5mm plywood. Is it mandatory standard to use 9mm ply on bathroom chipwood floor? Thanks
  5. K

    Advice On Fixing Aquapanel To Chipboard Floor

    Apologies if this has been covered but I could not find much info on aquapanel searching, plentiful on haribacker... I am after some advice on fixing aquapanel to a chipboard substrate, what adhesive people recommend and what thickness of adhesive to use. The substrate is in good condition and...
  6. Sean Kelly

    Is This Chipboard?

    Can anyone tell by the floor markings if this is chipboard?
  7. B

    How Not To Tile A Floor (youtube)

    I wonder how many failed floors have come from diy'ers watching this video? How many thousands of pounds of tiles have been ripped up and skipped into landfill? Apparently its a trade secrete to PVA straight onto chipboard and then you're good to tile! I know most guys will have seen this...
  8. W

    Tiling onto chipboard?

    Am I right in thinking that it's not advisable to tile directly onto chipboard, this is in the en-suite, and it looks like the water resistant type, ( slightly green in colour ). The old tiles were stuck onto thin ply, but I had to take that up due to the amount of adhesive that was left on it...
  9. I

    Tiling on water resistant chipboard

    Hi there I am new to this and I would just appreciate a little bit of advice. I have searched various forums and cement manufacturing companies who claim that chipboard flooring can be tiled on as long as the floor does not move, there are no gaps and that boards are screwed at 300MM intervals...
  10. R

    Limestone over ufh and chipboard

    Opinions please gents. I've been to see a job this morning where the homeowner has seemingly been let down by a series of tilers who were supposed to do the job but now can't. The floor is newly constructed chipboard caberfloor over 6x2 joists with a wet ufh underneath. This has been pressure...
  11. S

    Chipboard, Hardie backer primer!

    Hey guys think I may be about to make a boo boo! I am tiling a chipboard floor, firstly over boarding with Hardiebacker. I have cut all the Hardie, hoovered the floor and just primed the floor with neat primer g. While waiting on the primer g drying (having lunch) I was just reading over the...
  12. D

    Advice for adhesives when using hardibacker on a chipboard floor

    Hi, just looking for some advice on tiling onto hardibacker which will be on top of a chipboard floor. Which non-flexible bal adhesive should I use to lay the hardibacker board on and what flexible adhesive to lay the tiles on? The Floor area is and in a bathroom and is not very big
  13. M

    Green chipboard base.

    I took on a job tiling a hallway which was covered in laminate flooring, beneath which was a green chipboard base. Against my advice the customer wants to save money by using this to take the new tiles. To remove the chipboard would mean removing three walls of book cases which are built on it...
  14. J

    Replacing Chipboard Floor and Prep for UFH

    Hi I have a small bathroom 2.4x2.5m divide by a step up across the middle which is where the bath and basin go. Plumber needs to remove the chipboard floor on the step level to plumb in new bath and vanity. Considering what to put back down once he's done and that will also be suitable for...
  15. aflemi

    Floating Chipboard Floor over Hetta wet ufh pipes (like polypipe)

    This is about a Victorian conversion property I am buying. I agreed purchase on condition that I fitted out 2 bathrooms. Builder has constructed the following floor structure: "The floor make up is as follows. 22mm chipboard glued joints and onto the Ecojoist. 6mm Accusti rubber mat laid over...
  16. M

    Tiling onto chipboard, opinions??

    Hi guys. I have always plied floors before and a customer asked me a question that i wasnt 100% sure on. 'why will adhesive stick to ply and not to chipboard'? i rang my local supplier just to make sure that i was correct and one guy i spoke to said no adhesive wont stick and another said it...
  17. S

    Green chipboard preparation

    Hi AGAIN Prior to laying hardi over green chipboard, will I need to prime or sand before laying hardi on thinset?? Cheers
  18. Ken Bruty

    another chipboard floor.

    Hi guys, been asked to tile hall/wc with chipboard floor but have advised not to tile on chipboard. So I am removing it along with plastic dpm and polystyrene insulation. This leaves concrete.... so starting from that, has anyone done this and did you latex bare concrete after priming, then...
  19. B

    overpling chipboard flooring

    Hi guys have always over plyed chipboard flooring prior to tiling but what is the reason for this if chipboard was primed would it be ok. Other theories are easier to strip flooring at a later date please enlighten md ..brum
  20. S

    Chipboard

    I've a hall way to tile, 10m2, & have height issues with the front door, it can't be raised. I haven't got enough height to overboard with 6mm Hardie so it looking like I need to tile direct to chipboard. The floor is solid with no bounce in it. I've told him the problems associated with this...

Advertisement

Top