floor tiles

  1. D

    Dot and dabbed floor tiles

    I have recently moved into a house with both underfloor heating in the kitchen and bathroom. 3 or 4 of the kitchen floor tiles have cracked and i am fairly convinced they have been installed using the dot and dab method as i can hear a hollow sound in places. I wonder if there is a product out...
  2. Wilwong

    Zamora Brown 600 x 600 floor tiles bought from Topps Tiles 2009

    Hi needing 4 at least to replace after redecorating I bought them from Topps Tiles back in 2009.. believe these were manufactured by Megastone cheers!
  3. B

    Identify floor tiles

    We have these floor tiles through the house on a solid cement floor. Now we want to clean and reseal them. I thought they were some sort of quarry tile. Size is 1 ft x 1 ft. Rough irregular satin surface. Possibly a glazed colour. We tried cleaning and resealing a small patch but it came out...
  4. D

    150x900mm floor tiles - 2mm grout and 50:50 pattern

    Builders have installed 15x 900mm tiles with a 2mm pattern and 50:50 brick effect. They suggested 2mm (I previously suggested 4mm), I probably suggested 50:50, but did not know that grout / pattern effected anything but aesthetics. There is now widespread lippage due to what I am told is...
  5. R

    Primer for tiling over sound/solid floor tiles

    Hi, I'm wanting to tile over kitchen floor tiles, tiles are soundly stuck down. Main issue is they're smooth and shiny. Cannot be arsed to grind them. What's the best primer before laying over them. Thanks in advance
  6. U

    help with 6mm floor tiles

    Hi guys, newbie here and after advice/opinion So we have 210sqm of 120x120x6mm porcelain floor tiles to go down onto UFH with a Chemfloor cement floor. I have been told I need decoupling mat due to the size and been told not to use the membrane due to potential air pockets that could cause...
  7. M

    Looking for Merola (possibly) kitchen floor tiles?

    Not sure of name (Merola or Alora?), or if they're porcelain or ceramic (suspect the latter), these are fitted on kitchen floor and am struggling to identify them, or find on-line. They were fitted in the house when we bought it back in 2005. The tiles measure 13"x13" (33x33cms), some are...
  8. G

    Floor tiles on HardieBacker on chipboard - adhesive recommendations?

    A few years ago, with advice from the forum, I used Tilemaster Setaflex S1 when I laid my 600x600mm porcelain floor tiles onto 24mm NoMorePly in my bathroom with great results, they are still solid and look perfect. Now I'm tiling my shower room (first floor on joists), that has 18mm chipboard...
  9. T

    Terracotta floor tiles

    Hey guys! I am in need of some solid advice. I just had some terracotta tiles installed. It had to be shipped from California to New York. In transit, the tiles did get some scuff marks. Obviously got installed with the scuffs in them. After installation, an impregnator sealer was applied on top...
  10. S

    materie bc 30 12 x 12 porcelain floor tiles

    I am looking for materie BC 30 porcelain 12 x 12 tiles, Gres Ceramico Fine I beleive was maker or it could have been Leonardo Ceramica
  11. N

    When to apply grout to shower walls & floor and bathroom floor tiles

    Hello, I'm renovating my 2nd floor master bath. I'm about to lay down tile in three areas... on the shower floor first, then the his and her side bathroom floors, and finally the shower walls - in that order. My question is... Should i grout immediately after each tiled area's mortar it...
  12. P

    Floor tiles with uneven floors

    Hi I’m planning on tiling my concrete floor which isn’t level. I also plan on having electric underfloor heating . Is it best to use 6mm insulation boards bedded with adhesive to level up thanks
  13. R

    Grout starting to crack around floor tiles

    Not long ago I had the existing water damaged downstairs bathroom floor replaced with a whole new chipboard floating floor – this was before considering tiling, so I realise it would have been better to fix the floor but too late now. Having later decided to tile, the tile supplier suggested...
  14. R

    Sealing limestone Modular Floor tiles

    Hi, Going to be laying a modular floor with limestone tiles. Floor is a kitchen. What sealer would you recommend? And what is the usual coverage? Also how many coats needed? Thanks in advance
  15. Ricardo1

    External Floor Tiles

    Hi, first time poster looking for advice on tiling a door step. I'm using 250mm x 250mm Victorian designed tiles, black & white in colour which seem to butt straight up together with limited spacing between. Can anyone advise on this & what grout to use. Thanks
  16. R

    Advice please, should I restart floor tiles and re-level?

    Hi All Looking for a bit of advice if I may? I recently embarked on a project to replace the bath in the en-suite with a shower, but once the state of the flooring became apparent the project grew legs and the whole room got gutted! I have replaced all the OSB with 18mm ply, due to...
  17. A

    Floor tiles

    Should Silicon or decorating chaulk be used where the tiles meet the skirting boards
  18. N

    Is this true? - hairline crack in one of the newly placed floor tiles

    We recently had an en suite fitted by a local company that appears to be generally reputable. We've had a few issues with the work, one of which was that we noticed a hairline crack in one of the newly placed floor tiles. The company sent someone out to replace the tile and although I didn't...
  19. T

    Venus Ceramica floor tiles

    Does anybody have the floor tiles pictured. Need at least eight. 430mm x 430mm
  20. F

    Reported content: Post in thread 'Approximately how thick should adhesive be for floor tiles? Tiler only using 2mm thick'

    Post in thread 'Approximately how thick should adhesive be for floor tiles? Tiler only using 2mm thick' by Frilly has been reported by Frilly. Reason given: Content being reported:

Advertisement

Top