keraquick

  1. K

    Ditra - 2 part keraquick latex

    Good Evening. Will be laying soon some ditra matting and will be using Kerraquick and the latex. Has anybody used this combination before? If so did it bond well with the fleece and how long before it had fully cured? Thanks. Kevin
  2. F

    Mapei Keraquick won't set?

    Hi all I need to put down a small amount of backerboard and a few tiles at the end of my kitchen. I put down a thin layer of adhesive last night (5mm say) to build up the level a bit so I could stick down the backerboard and tiles today. It used keraquick with latex plus but 10-11 hours later...
  3. K

    Ardex 200 af or Keraquick with aditive

    Good Evening. Have a floor coming up that as had ply overboarded on a wet ufh system. Probably not an ideal substrate but the customer wants to go with it. Looking at running ditra over but wondering which adhesive would give the best grip on ply. Intially was looking at keraquick with...
  4. C

    Keraquick & Latex plus long setting time??

    Hello! Tiled 4mtrs quartz starlights today - 300 x 300 tile hq ones - on my bathroom floor. 22mm floorboards screwed to joists overboarded with aquapanel, glued and screwed... so far so good... Finished laying at 4.15, just checked and still hasnt set :helpsmilie: All mixed as Mapei...
  5. D

    Mapei keraquick ok for mosaic sheets?

    Hello, I'm planning to buy Mapei keraquick for my wall tiles but my wife wants a single strip of mosaic tiles in the shower. Can I use the same adhesive? Thanks danZ
  6. R

    Mapei Keraquick Grey Storage life

    Hi there, just about to finish off a job I started last year with loads of help from you guys on here. Thing is I have some keraquick addy left (4 bags) which has been stored in adry garage and has manufacture date of Feb 2011. I know the official life is 12 months but do you reckon it is...
  7. M

    Mixing Keraquick and Latex

    I am Tiling my Daughters bathroom in coming weeks and have been trying to gain more knowledge by reading advice given on this website. The floor is chipboard overlaid with ply and screwed every 200/300 mm. I have brought keraquick and latex to give more flexabillity on the wood. I know this...
  8. J

    Mapei keraquick alternative?

    Hi,I live in southern Ireland (Cork / Carliw) and need to find readily available / good alternative to mapei keraquick Polymer modified flexible S1 adhesive + liquid latex...bought a pallet from the Uk and can't get a bag locally now....Thanks,James.
  9. aflemi

    keraquick + latex plus drying time

    Wonder if anyone has experience of long setting times recently or if I have a bad batch of keraquick... Fixed a layer of durabase ci with adhesive yesterday evening, to aid adhesion I placed 2 floor tiles at several places round the edges. When i removed tiles this morning adhesive still wet...
  10. 2

    trav and mapie keraquick ?

    Hi , as iam not realy up to scratch with mapie products , is keraquick white spf ok to use with trav mosaics going onto skim ? also ive got some left over lithofin Stain-Stop , now would this be ok as a sealer ? or should i stick with LTP mattstone ? ive got sbr to prime walls with :thumbsup:
  11. B

    keraquick

    hello.could someone tell me if you can extend the pot life of keraquick by stirring regularly? spec says a 30 min pot life which is no good for me as i`m a slow tiler,but if i could work with it for say an hour i might give it a try.thank you.
  12. T

    Keraquick Update !!

    Hi again A wee update regarding adheisive failure as discussed in a previous post : Phoned Mapei on Thursday mid afternoon and reported the problem, tech help said I would hear on Friday from my local rep ,never heard so phoned tech help again friday pm and told all that was discussed was...
  13. T

    Keraquick Issue

    Hi After laying a 3.5m floor on Tues, I was getting ready to grout the floor today after finishing the Walls when I noticed that the tiles were hollow sounding so had a closer look a noticed that a tile was moving, so got a screwdriver and lifted a tile then an other and another........ When...
  14. C

    need some keraquick white for tomorrow..

    I need to buy 4x20kg bags of keraquick white for tomorrow - anybody recommend (by PM if nec) the best place to buy it from price wise - best price i can get on the internet is about £24/bag.. thanks!
  15. T

    Mapei keraquick, good or what.

    Here are some pics (not very good) showing a tile I had cut around a socket. The customer changed his mind, so I had to remove it. This tile had only been on for twelve hours. As you can see, it ripped the whole peice of plasterboard off. Proof of the strength of primer G and Keraquick:thumbsup:
  16. L

    Keraquick onto concrete

    Is there a possibility of a chemical reaction if I use Keraquick over concrete? should I PVA to ensure a barrier? all outside work.
  17. M

    Keraquick how far does it go

    Used the white today with a 10x20 mm half moon trowel and back buttered 670x450 porcelain tiles cos they had a deep biscuit must have got only 2.5sq metres usage.
  18. F

    keraquick and tanking membrane

    Can I use keraquick adhesive with the Homelux membrane onto ply and also for the ceramic tiles ? or do I need to different adhesives ? Havent got time to get a membrane from Wetdecs as need it tomorrow morning.
  19. S

    Mapei Keraquick - is this ok for plasterboard?

    I have three different types of wall that I need to tile. One is a bog standard plastered wall. The second is a cement based board (aquapanel) and the third is just good old plasterboard. I want to keep things simple and use Mapei keraquick to fix tiles to all of these walls but I am not sure if...
  20. T

    Mapeker vs Keraquick

    There seems to be confusion since Mapei lauched the posters regarding using Mapeker on oveboarded ply, was wondering if anyone can clear this up before someone has comeback using the wrong material on ply, cause I thought Keraquick was for ply and Mapeker was for concrete !!! TUBS

Advertisement

Top