Looking for recommendations for a job I looked at yesterday, it’l be a high spec kitchen which will be having a tiled floor on the concrete slab. Now although I have installed plenty of electric ufh in kitchens and bathrooms none of them have been this size.
It’s all one floor area but would...
I would be grateful for some help please! Bathroom walls were bonded a few weeks ago but didn't apply skim at the time (long story). Is it too late to skim now? If not, how should the bonding be prepared / sealed prior to applying the skim coat now that some time has passed? I understand that...
Hi guys I wonder if anybody can tell me what's gone wrong. We have laid a load of 1200sq porcelain tiles using the retailers recommend adhesive. The ufh was fired up a week later and temp was raised a couple of degrees per day and every tile has lifted around the edges. They are still stuck firm...
Hi
I have a 900 x 900 shower enclosure that was showing some dampness through the grout joints and solid plastered brick walls after 20+ years.
I liked the tiles and have manage to remove and clean most of the 250x 300 porcelain tiles, ready to refit after tanking the walls, (on a tight...
Hello, my introduction and screed issues thread has probably run its course now that I have bitten the bullet and have a contractor appointed. Now onto the real deal so to speak...
The scope is to tile a new kitchen diner extension which is 30sqm with an l shaped kitchen and island. The room is...
Deleted member 51481
Thread
bathroom
format
kitchen
largelarge format
new build
project
tile
tiles
Hi, looking for help. I had my shower tiled in 600 x quartz tiles about 4 or 5 years ago. Over the last 12 months cracks have appeared in the grout on the top 3 rows of tiles and they have started to protrude. I have removed the offending tiles and found that they have only been fixed with dot...
I am laying some large format tiles 100cm x 50cm soon and i always thought the gaps should be 4mm plus ? however you see many tile jobs with small gaps eg, 2mm ?
I would really appreciate some feedback please
Hallo all, I tought may be I get some advise from this great forum.
I have been offered a job for a small bathroom, appr. 1,8 x 1,8m floor area, to be tiled with 60x60cm tiles, same tiles to wall / floor.
Also, I need to make a slope to the drainage, its the "linear" model near the wall.
I...
Relit
Thread
floor
floor tiling
former
large
shower
shower tray
tile
wetroom
This is how I got covered in Celotex dust in the image from Simons post. It wasn’t much fun, nasty stuff that.
This is the less glamorous side to fitting ex large formats.
Trying to squeeze 3.2’s x 1.6’s in to a very small space.
They were cutdown to 2.4m first, and had to go in to a shower...
Hello.
I've been browsing around the forum and hopefully can be put in touch with someone that can help.
We are looking at getting 45 Sqm large format tiles installed in our games room floor.
We are struggling to find someone that will install large tiles.
I would like the look of continuous...
We have got a large site in Bath with an immediate start
Nice easy spec with only 2 tiles acros the whole site, a nice bit of meterage per unit to go at, and a friendly site Team.
There are good rates of pay available and an immediate start. If of interest please give me a shout!
Looking for a low cost efficient tiler for large 120 sqm job. Brand new flat as a pancake anyhdrite screed and large format tiles on single storey barn conversion should make it a v. straightfwd job. A few posts and lights to cut around but mostly straightforward. Will prime and clean so all...
Julian Power
Thread
find a tiler
floor
floor tiling
job
jobs
large
surrey
tiler
tiler wanted
tilers directory
tiling job
tiling jobs
tiling work
wanted
work
Hello everyone, we are in need of some sound advice on a dilemma we cant get 100% answers to, we are having a single storey extension and knocking out the back wall and dining room wall to form one large open kitchen/living area.
We intend to fit wet UFH to the new part of the extension but we...
paul kitchen
Thread
expansion
format
gaps
largelarge format
tile
tiles
ufh
Keraquick XL Fibrelite products - http://bit.ly/2uOJUBT is a powder composed of a mixture of special cements, selectively graded aggregates, synthetic resins, fibres and setting accelerators that develop a high bond strength only 90 minutes after setting.
For this reason floor installations can...
Hi All. Just been to see the Wizard of Oz @3_fall . Met Marc onsite today to pick up some tooling. Given a good demo on how to use it ! Marc spent all day with me showing lots of his tricks and modified tools to make life easier to install these difficult tiles. Anyone out there who thinks its...
Hi,
I am new to tiling and would like some advise on how to keep large format tiles flat and even on the wall. I am currently installing large format porcelain tiles to a bathroom wall that bows out in the middle and dips back in one of the corners (makes the tiles bumpy). It is an old house...
Hello fellas,
About to price 170m 1500x750 10mm porc on anhydrate screed, big areas.
Initial laitenance removed, will use Kerakol primer and bio addy.
Also about 100m of 300x300 in smaller rooms.
The job is in one of the most expensive roads in one of the most expensive areas of south bucks...
hi all,
I wrote some time back about issues with ufh system, we managed to get this laid and poured a screed over to level the floor. The screed wasn’t perfectly level but there wasn’t a great deal of variance across the floor. We employed a tiler as opposed to DIY due to large format tiles...
Shinyshiny054
Thread
canada
floor
floor tiles
floor tiling
format
largelarge format
lippage
tile
tiles
So this is it, the very latest large format cutter out there, released just a few weeks ago by Raimondi.
Standard kit is the two 1.7Lm rails, carriage and pliers, all wrapped up in a padded bag.
The 1Lm rail is an optional extra.
There’s one more missing piece, however, it’s not even released...
Old Mod
Thread
cutter
format
largelarge format
new build
raimondi
tile cutter