laying

Tile Vibrator Suction Cup Professional Tiling Tools Machine Floor Laying Machine. 1 x Tile Tiling Machine. When working, be sure to hold the suction cup to work on the tile, do not let the machine idling, do not keep pressing the switch during the paste process, and the rhythm is more conducive...

Tile Vibrator Suction Cup Professional Tiling Tools Machine Floor Laying Machine. 1 x Tile Tiling Machine. When working, be sure to hold the suction cup to work on the tile, do not let the machine idling, do not keep pressing the switch during the paste process, and the rhythm is more conducive...

Description With 6 adjustable speeds, you can change the vibration frequency of this tile vibrator leveling machine according to the tile size and plaster thickness.The easy-to-use on/off and speed buttons as well as the ergonomic handle allow you to say goodbye to manual tiling, reduce breakage...

User-Friendly Operation: Its suction and vibration modes with 6-speed gears allow it to suck tiles and lay tiles easier with simple button pressing. Whether you're a professional or a DIY enthusiast, you can master the operation! Continue reading...

Tile Vibrator Suction Cup Professional Tiling Tools Machine Floor Laying Machine. 1 x Tile Tiling Machine. When working, be sure to hold the suction cup to work on the tile, do not let the machine idling, do not keep pressing the switch during the paste process, and the rhythm is more conducive...

Wall Floor Automatic Leveling Tiler Electric Tile Vibrator Machine Tiling Tool. 1 x Tile Tiling Machine. When working, be sure to hold the suction cup to work on the tile, do not let the machine idling, do not keep pressing the switch during the paste process, and the rhythm is more conducive to...

I've had a look through threads but cannot find anything on this. Lots of info on commissioning screed, but I can't find anything on post-screed-commissioning. The question is: what would be the best UFH commissioining process after laying 10mm slate tiles? 10mm slate tiles on a solid 6mm...

Can I trouble some experts in here for some advice on laying pavers on a concrete pool surround with a fibreglass pool shell. The slab was done around the shell 12 months ago there are no expansion joints in it no cracks in it but I’m no concrete expert Is it absolutely critical to cut an...

When laying 1st row of porcelain tiles following line of house wall, Is it best I leave a gap for grout or but up direct against house wall? Thanks regards The Famous Forry.

Hello you Pro’s out there. I am embarking on replacing my current outdoor patio concrete slabs with Porcelain Slabs 60x60cm x 20mm I have been advised to do it 2 different ways so far. Is there a Right Way and a Wrong Way ? I have been advised to take up slabs, hardcore base, compact then lay...

Hi everyone, I’ve a fairly basic question I thinks, hope someone can help me out with. I’m going to be laying some mosaics on a foot path leading to my front door but before I can do that I need to lay a new concrete slap to get a gradient from door to public footpath height. I’m struggling...

Hi, I have 600x300mm Tiles to go on the floor and walls and was intending on laying them in a Stretcher Bond pattern. Now I have bothered to look at the boxes I see a diagram showing NO to a 50/50 stretcher Bond but OK to an offset more like 70/30. Any of you fine people out there have any...

Hi, I'm planning to do a herringbone brick floor over a concrete slab with some reclaimed brick tiles . The bricks have been sawn into narrow longs roughly 50mm x 50mm x 250mm, but there is still a fair bit of variance. Have enough extra that I can get the variance down to 5mm by being...

How smooth does the floor surface need to be before laying porcelain tiles? I have removed tiles and theres bits of adhesive stuck to the floor causing small bumps, theres a few pits too. Can I lay tiles straight over this?

Hi. I would like to have new tiles over the old tiles in the bathroom. The old tiles are of glossy type. The first thing I did is I removed the gloss from them. I used an angle grinder with a diamond disc. You can see the results on the pictures. The new tiles are going to be 30 cm by 60 cm...

I live in Berkshire, UK, where the soil is clay. My current patio is block paved (laid about 20 years ago) but I am looking to have a porcelain tiled patio. My house is on clay soil and I have two large oak trees in my neighbouring garden. I find that during the summer, a gap opens up between...

Hi All, So i'm looking for some advice on laying travertine DIY. Here is the situation: 38 sqm area Substrate is a 125mm concrete slab freshly laid and is 3 weeks cured The substrate has a suitable fall for water run off Tiles purchase - Linen coloured 12mm Travertine 406x406 bought form...

I’m laying hexagon tiles on plywood floor. They are small tiles and a small cupboard and wondering what self levelling system will I use? Also looking to see what primer would be ok to use?

Hi, This is for a bathroom (including a bath). I have a buildup of timber joists / 22mm ply / 25mm thermal rockwool batts (with wet UFH pipes running through them). I would appreciate any suggestions on what layer to add next to create enough rigidty to lay tiles. I appreciate that trying...

Looking for some urgent advice on floor tiling! We laid 600x600 tiles a month ago with already made adhesive but it’s still wet and the tiles are now cracking abs bracking... please advice what’s the best adhesive or products to last 600x600 porcelain floor tiles thanks