hello,
So I’ve been reading a few posts on here about laying mosaics, can’t seem to find anything for wetroom formers that already have the fall built in.
Can anyone give me a few tips to laying mosaics over a wetroom firmer please? Area is around 2.5m2 and custard hasn’t chosen mosaics yet so...
James De
Thread
canada
former
laying
mosaic
mosaic tiling
mosaics
over
room
wet
wet room
Hello all,
This is the first time I have used this forum, and after some advice... bare with me....
I am about to lay 40m2 of natural unfilled travertine tiles 12mm thick on top of electric underfloor heating and a 60mm tilers screed. I have a few questions on the best way to go about this...
I'm about to lay an anti-fracture mat onto plywood, does the ply need any coating before I lay it?
1 or 2mm adhesive underneath the mat?
Can I use BAL Single Part Flexible Tile Adhesive for the mat?
Can I use BAL Single Part Flexible Tile Adhesive for floor and wall tiles (they are 9.5mm...
Hello,
I am planing on using no more ply over my existing 18mm flooring to lay 600x300 porcelain tiles.
Would there be any benefit in laying 2 layers of the 6mm no more ply to create 12mm covering.
Will this make the floor stronger or is the 6mm enough.
The joist are 8x2 at 16inch...
Hi All, I will be laying 9m2 of 600x300 rectified polished porcelain tiles in my bathroom. It will be over green chipboard and I know all the advice is against this but I have tiled over chipboard before and not had a problem. It is new chipboard, well screwed down at 5” centres with no bounce...
Hello, please can someone advise me before I mess up and waste loads of time and money!
Do I need to prime P5 moisture resistant T&G chipboard before I lay Aquapanel? Also, do I have to then prime the Aquapanel before I lay the ceramic floor tiles? I will be using Mapei flexi quick set tile...
Please can somebody share their knowledge and let me know if I’m on the right track, i.e do you think the steps I am about to undertake are going to prolong the life expectancy of my first attempt to tiling a floor (I am just a mere DIYer and not professional)?
The situation is that I’m trying...
Quick one to check I'm on the right track -
I'm planning to do a tiled bath panel (with access panel using some Schluter magnets). Am I right in thinking I should have cuts below the bath rim and cuts down onto the floor?
It'll be about 560 mm high, tiles are 200 mm high, so I'm thinking to...
Hi, We've just finished pulling up old quarry tiles ready to fit new Porcelain tiles throughout! Had to remove quarry's due to levels of external doors, were unsure what the subfloor is beneath the quarry's, I believe the property is prone to rising damp seeping through subfloor as no DPM.
I'm...
hi
I bought 200mm by 500mm Argenta Camargue Perla ceramic tiles and Bal Grip plus tub... to find out the Bal Grip plus isn't up to the job because of the size of the the tiles. I see from other threads there is a more 'professional look' way to lay tiles, so we are not sure how to lay them...
BUffy
Thread
adhesive
brick
former
grout choice
laying
shower
shower tray
size
spacer
spacers
spacing
straight
tile
tile adhesive
tile spacer
tiles
wall
wetroom
what
which
Hello Gentlemen,
I am undertaking a small self-build cottage in Norfolk.
I am looking to have 20mm thick limestone flagstones layed on the entire ground floor - which consists of four square rooms and a total of 64m2.
The base is a near perfect concrete slab and will need a 10mm adhesive...
hello all, I'm laying 600 x 400 limestone tiles in a small downstairs toilet. It's been tiled on to a primed ply floor screwed to floor boards. This is the old stuff that was there from when the floor was tiled before over 20 years ago. The ply seems in good condition I've just added loads more...
Hi All
Getting a big job done on the kitchen come living room. Having wood effect porcelain planks installed. It is part of a renovation of my new house and the builder is looking after most of the work. He will have his tiler do the work, but just wanted to check in here with the experts to...
Hi all, I'm hoping someone will help me with some much needed advice....
I am renovating our 1930's property room by room and next up is the kitchen! I have laid wall and floor tiles before but never natural stone, in this case we are looking at using travertine tiles.
The existing floor is...
Hi please forgive my ignorance ,im looking for a few pointers with my new kitchen floor,i've taken up the old tiles and chipped away all the old adhesive and im ready to lay my new floor.
I've chosen
MAPEI KERAQUICK RAPID-SET FLEXIBLE TILE ADHESIVE
and
MAPEI LATEX PLUS
Is this correct ??I need...
Hello all,
We had a wet self levelling screed floor pumped into our kitchen back in October. UF Heating has been running well since. Just ordered 900x600 limestone tiles and need advice on prep before laying them. We have been told various things, conflicting too. Do I need to seal/prime the...
what adhesive do you's all recommend for laying large format tiles to floors, I usually use Dunlop large format , or kerakoll h40 skimming the back of the tile obviously!
Looking for a few other options with great coverage and grab ! Tiles will be 1200 X 600 onto heated screed