Hi
I'm putting in a Novellini wet floor kit, I'm not making a wet room , just want the shower tray hidden and tiled over, I'm fitting a shower screen as normal once it is all tiled.
My dilemma is that the Novellini base unit is 22 high and mounts onto the joists, in an ideal world I'd lift the...
I am doing a bathroom installation but it is currently a wet room. Can anyone advise best way to remove floor and level for tiling and any further treatment required? Cheers
Gowser
Thread
floor
floor tiling
how
how to tile
level
room
tiling guide
usa
wet
wet room
I have just had a new kitchen floor installed using floor boards over screed as old fired earth tiles were taken up. Have primed floor and laid Warm up UFH mats down. The question is do I require to lay a level compound over the top to protect the wire eg Cementone cempolay level compound from...
Hi all
I have just had a new kitchen floor installed using floor boards over screed as old fired earth tiles were taken up. Have primed floor and laid Warm up UFH mats down. The question is do I require to lay a level compound over the top to protect the wire eg Cementone cempolay level...
Sorry if this has been covered elsewhere. Looked but couldn't see it. I'm in the market for a decent; quality & price (oxymoron?) laser level. Mostly need it to help floor levelling (may use it for more once I have it). Never used one so not sure what things to look out for.
Hi All,
Been renovating my house for the last four years and have nearly got around to doing the bathrooms!!!
Just wanted some advice on my approach to installing the Tuff2 former...
The problem i have is that the joists the former will be sitting on are not level and to make...
went to look at a shower I'm tiling next week. He is putting the tray in tomorrow and was setting it square by measuring from the ceiling to the top of the tray!!!! original
When I tiled my kitchen floor I had a problem of level difference. The kitchen had originally been a rear entrance hall (5 foot by 7 foot), a corridor and a utility room. This had been changed by a previous owner to produce a kitchen about 17 foot by 11 foot.. When I came to refurbish the...
easyt
Thread
bathroom
diy
do it yourself
floor
kitchen
level
usa
walls and floor
Im working on a kitchen / family room where it is all open plan, except there is a step and a change in level.
I’m laying 60x60 porcelain floor tiles, but don’t know if I should try and line up and run the tiles through, or treat it as two separate rooms and set them out as such.
I’m also...
Hi lads just bought myself a Hilti PML 32 laser level as i had posted a while back i was going to get one and i did :)
Now my question is for leveling floors can i use this laser level to find out how bad the floor is up and down or is that a stupid question ? just wondering has any1 used...
Glasnevintiling
Thread
floor
floor tiling
laser
laser levellevel
screed
screeding
usa
I have been keeping my eye open for a 'budget' self levelling laser for a while now.
I know I should buy quality and buy once but my budget does not allow. I also know this is not an essential tool but after using John's laser a few month ago I have noticed on a few job that I could have done...
Hey everyone gonna invest in a new laser level and i'm wondering which of these are better for tiling
DeWalt DW087K Self-Levelling Line Laser
HILTI PMP 34 PMP34 Multi Directional LASER
Any help would be really appreciated
My last job i had some really bad window reveals so thought i'd do my bit and take some pics on how to rectify them. No doubt some will use the same method but for those that dont, here goes.
This is what i was faced with and the thought of them being packed out with adhesive didnt really suit...
hi to all hope ever one is well just in the middle of doing my kitchen and bathroom ripped the celings down and re plastered now put insulation boards down with flexy addy warmup mat to go down and will cover with hdb one to screed the mat do you think it will be ok .:8:
Just noticed that Cosco are now selling 48"Fatmax for £15.99 +vat seems like a good level as i have been using Alan p`s looks like a good price ? :oops:
I did my own wetroom a while ago and the floor area around the former I left level, is this normal practice or should an attempt to creat a slight fall be made?
I need to level a concrete floor with an adjacent kitchen floor so the tile run is a smooth transition.
Using self level is too expensive so was wondering whether using 10mm Marmox or Hardibacker sheets would be a better bet?
Would any further mechanical fixing be needed or is the tile...
Hello,
I am hoping someone can help me. I am looking to take my NVQ level two in tiling. I have worked with a tiler in the past and in other building trades as more or less a labourer. I am no stranger to hard graft, and already have a grasp of tiling. However i want to undertake the course...
Apprentice.
Thread
apprentice
find a tiler
level
nvq
tiler
tilers directory
usa