I need to tile a large irregular shaped room and don't see a way around taking a break. The tile is tiles laid befor ethe break plank and I am using a wedge based leveling system. What 's the collective advice for how to stop and finish sections? I.e. I amm concerned about how to make sure I get...
A job coming up I'm would like to use a self leveling kit. I'm wondering if the cheap Amazon ones are any good or can anyone recommend one?
I'll be tiling large format porcelain on walls
I've been using the t/m rapid leveler, although in the hot weather it goes off to quickly, almost as soon you pour it..!
Any recommendations of a leveler that flows as well .........but doesn't go off in 3 seconds.. :)
I used some Mapei Ultimate leveler 1210 yesterday. Today I've noticed that in an area of it a skin 1mm thick has raised and separated and can easily be scraped off. When I laid it there was quite a lot of air bubbles rising in it and I went over with a steel float to try and get rid of them, now...
What I have noticed in the past when putting levelling compound in fairly thick is that when running a spike roller through it can push some of the levelling along in front of the roller like a bow wave . I guesed this is to do with the spikes being to close together so today i took an old spike...
ON this thread: Floor Tiling On Concrete - Several Questions About Floor Prep and Laying - https://www.tilersforums.com/threads/floor-tiling-on-concrete-several-questions-about-floor-prep-and-laying.87417/page-2#post-931307
I asked abuit how to level a row of engineering bricks that sit 2 to...
Hello,
Has any one used these. Or should I stick to spacers.
I am laying 600x300 rectified porcelain tiles.
Tile Leveling Spacer 2mm System High Quality same as Raimondi Qty 500 | eBay -...
Hi
We had self leveling compound laid about a week ago by our builders in our shower room and through to our kitchen/diner, i`ve been cleaning today and i`ve noticed cracking and breaking at the edges near the patio doors. It was laid onto plywood boards (in the kitchen area) , concrete in the...
Hello,
I've recently started renovating our kitchen/dinner. We've had a new concrete slab poured and it appears that the builders have put a tamped finish on it.
They used a rack to spread it out and get it level 'by eye'...
Due to this, I cant determine how level the floor is and how much...
Hi All
Looking for some tips on mulitiroom leveling. As it is it looks like the kitchen has the highest point with the floor dipping into the utility and then into the hall again dips.
I'm wondering how others tackle these jobs.
The kitchen will need a liquid dpm so my usual way of drilling...
Hi Guys,
First off, sorry for my bad grammar. I'm from Sweden and english isn't my native languege. :)
I'm about to install limestone in size 300xfalling (falling=300-700mm) in a hallway. The limestone is 100% flat on the back.
The under floor is 12 month old concrete.
In sweden there is an...
Hi everyone! I've been reading levelling system old posts and have a few questions in relation to some points.
Someone said that PLM or Mustang would leave scratches in high polished or lacquered stones, also it was said sliding systems as RSL could mark some stones. I have digital glazed...
Ive to tile 2 floors that are in 1 room with a dividing wall half way across the middle however im in a tricky spot and with floor levels. Its an old house and floors where in a bad way. In one room ive grinded it down all flat and near level as i can get it. Theres also an inch step into the...
Hi all,
What do you charge per sq.m ? or you do day /hour rates? Have done 130 sq.m a week ago and send invoice. Floor was only up to 6mm in high difference, but client wanted it perfect. Just want to see if I was not too cheap....
Thanks
Absolutely furious with some cowboy builders who are completely taking the biscuit. They've not done near as much as they should have on any given day and are holding up the whole show. And their work is shoddy as heck. I mean they mustn't know how to use a level and clearly haven't the...
jimbob
Thread
builders
canada
deal
how
leveling
preparation
preparing
I am installing 6x24" (152mm x 610mm) wood look porcelain tile in an approx 200 sq. ft. (6096mm) room. Rectified tile, remarkably flatter than some 'long' LFT's I've seen.
I had someone install 5/8" (15.875mm) plywood over the slatted subfloor. He told me the floor was pretty flat using a 7'...