Hi.
I've just used Mapei Ultimate Leveller 1210 to cover a very irregular concrete floor in our house. It's the first time I've done this particular kind of job and I'm quite please with the results. It's a fairly big area at 21 m2. (We'll, I thought it was big. ) We intend on laying laminate...
Will this work?
(top to bottom)
tiling (one room), 12mm laminate (other room)
19mm T&G chipboard
self levelling compound
100mm Kingspan insulation (joints and edges sealed so self levelling does not run below insulation.
concrete slab (not level)...
Hi Does any one know of a self levelling compound, for external use that can be applied on 7 day old concrete? I know for adhesive BAL do the green screed and am looking for something to work with this.
Thanks
Hi everyone,
Hope to get some help and advice please.
I have laid down 8mm of self levelling compound on a concrete floor after priming it so it was a good level to work off (I also included an 8mm expansion joint around the perimeter) (Conservatory is 15 years old and area of 14 m2).
I then...
So I used some Mapei self levelling compound in my bathroom, it looks alright to the bare eye, but when checking with a straight edge (length of laminate in this case) there are still dips in the floor. Do I need more slc, or did I do something wrong?
It's hard to tell from the pics, but the...
Hi all, needed some advice. Can you fit kitchen floor tiles on a surface made level using a latex self levelling compound.
Can you tile straight onto the latex levelled surface or would you need to do something else before laying the tiles.
I hope i have been clear and if not apologies as this...
Ive used Tilemaster levelflex a lot recently but I'm looking for something that flows better, and behaves better, whats your go to leveller ? Rapid level 30 is the best flowing and the best final finish I've ever known but it's not always suitable with its working time and limited depth. Does...
had a quote back from a supplier for electric ufh and they’ve included 30 bags/bottles of ultra level it 2 slc.
Ive used mapei renovation screed recently, what/if are the benefits of 2 bottle/bag?
Hi all,
Firstly I would like to say this forum has a lot of useful content, I’ve found it extremely helpful over the past few weeks as a diy tiler.
I’ve installed an electric ufh mat and put down a suitable self levelling compound. The compound is pretty much dry and I’ve noticed in some areas...
Hi all,
I will be tiling my bathroom this weekend and want to make sure I'm set up to get it all finished by Sunday evening.
The existing substrate:
18mm plywood
12.5mm marmox board
I'm fitting an electric underfloor heating mat and propose to use a self leveling compound and then tile...
i have used this to level out a bathroom floor (link below)
Ultra Level It One Fibre Plus | Topps Tiles - https://www.toppstiles.co.uk/tprod45932/ultra-level-it-one-fibre-plus.html
do i need to prime this before tiling ? and if so what ratio.
So this is my first time using SLC, it's Mapei ULTRAPLAN 3240. Once I was coming to the end of the mix I notice a sludge at the bottom, I assume because I've mixed too fast *Facepalm. I mixed half a 25kg bag. Any advice would be greatly appreciated. I'm worried the mixed might be too wet now...
I need to bring up some sections of an outside concrete area to level it off prier to tiling, am I correct in thinking that Ardex K301 Exterior Levelling Compound is my only option. The area is not subject to rain as such as it has a poly carbonate roof but rain does get blown under it is also...
I am about to start levelling the concrete kitchen floor soon and I have a bit of a question regarding the self levelling compound I have.
It is the Ultra Level It One Self Levelling Compound
and on the packaging it says 3 to 50mm bed thickness .
Does this mean i am not able to feather the slc...
Hi, not really sure which section to post this in so apologies if this should have gone somewhere else....I know it's a fairly commonly asked question but I need to level out a downstairs bathroom floor (concrete) and was looking for some advise/reassurance (as this is a DIY situation) that I...
Hi all. Newbie here so please go easy :)
I've not laid self levelling compound before but am a confident DIY'er so would like to give it a crack.... just trying to do as much research as possible before hand...
I have ripped/stripped out an old bathroom suite (inc stud wall splitting cupboard...
Alex3874
Thread
compoundlevellinglevellingcompound
no more ply
ply
Hi all, I'm about to tile a concrete kitchen floor that needs leveling as it currently slopes and runs out by around 40 mm (from one end of room to the other). I just wanted to know whether (a) self leveling compound would do the job and if so, the maximum thickness that can be applied, and (b)...
Fast-setting, self-leveling, polymer-modified cementitious screed, used for smoothing and leveling concrete or mortar floors, before laying finishing materials like ceramic tiles, moquettes, parquet, vinyl tiles etc. It can be used at a thickness of 1-10 mm. Ideal for quick repairs, as it is...
Hi
My bathroom floor is not particularly level running out of true approximately 3mm. As most flooring covering manufacturers stress the importance of having a level floor I think that I need to use self levelling compound to achieve this. Can someone please recommend a brand to use as there are...
Hi again all!
I have searched for this on the forums and my search function seems to not be working so apologies if I am repeating an already asked question.
What are all your recommendations for a decent self levelling compound.
It is for solid floor but there are some holes which are really...
moomarine
Thread
best
canada
compoundlevellinglevellingcompound
mixing
self
self levelling
self levellingcompound