Hi.
Hope you don't mind me posting this here but having just completed our new build complete with travertine across the whole ground floor we have been left with a quantity of BAL adhesive and grout:
14 x 20kg BAL stone and tile PTB adhesive (white) - cost £14.99ea +vat from CTD, looking...
ardunan
Thread
adhesive
aus
bal
bal adhesive
building adhesives
grout
limestone
tile adhesive
tile grout
travertine
usa
Hiya, I'm tiling my bathroom as a competent DIYer/weekend builder. Bought a Vitrex 900 Bridge saw and about to buy ATS blades as I've done testing with the included blades and they're butchering my lovely stone.
I plan to mitre the joints but I can't see how this can be done on outside angles...
Looking at a job wher the spec is 45-50mm screed laid over existing concrete base .
two large areas .
the reflecta panel which is 13mm thick has an aluminium face on which t2reflecta -p-fix primer is applied before any flex adhesive can apparently be used to fix 20 mm limestone on top .
the...
do i really need a decoupling membrane if i use flexable adhesive and grout on a underfloor (Wet) heating system? I'm using large limestone slabs and have been told there is a danger of cracking due expansion differentials. Its just the guys who supplied the tiles have given me a massive quote...
As title. I need approx 10m2 of Moleanos Blue/Beige Mix honed in 600mm x 600mm x 15mm to repair and extend an existing floor.
Also known as Gascogne Blue/beige Mix and Moleanos Malhado.
I used to import this product and all the companies that I used to know back then have either gone bust or...
Evening guys
i have a limestone bathroom to try and fix tomorrow,it's for one of my existing customers who had it done before I met her
it is limestone from porcelanosa
the workmanship is terrible to say the least
im going to fix up what I can and build her a new bath surround
ehats the...
Hi Guys, Im new to this forum. I am going to do a job on a new build in a couple of days and would like a little advice. I will be laying limestone tiles over a 'dry' screed of sand and cement with UFH (air to water heating system). The builder has said he had left the heating on for two weeks...
Hi Everyone,
Am hoping someone can help with some advice here.
I have had 120sq mtrs of honed Opera limestone (600x600) tile laid in a renovation over a new slab. The slab has expansion joints in doorways, round the perimiter and down the centre of the largest room (59m2). After laying the new...
splas
Thread
aus
crack
cracking
debonding
limestone
tile
ufh
usa
Hello I have just had some Umbrian limestone tiles laid 32sqm (840*56 and 56*56 22mm Thick) These tiles are described as
"Umbrian limestone has a textured surface which looks well-worn and will last for many years to come. Hand-dressed edges and a soft riven surface give this stone a...
Neville
Thread
advice
aus
green
grey
limestone
please
should
tile
tiles
usa
been asked to reseal limestone floor about 100 m2.
not seen the job yet but guy says it has been tiled about 4 years ago, surface is waxy looking, not a clue what stuff has been used but was supplied by Porcelanosa.
what way to do this? strip sealer back to stone than reseal or just go over the...
I've got to tile a worktop with tumbled marble mosaics and I need to find a decent epoxy grout that is limestone in colour. I'm struggling to find any out there. Does anybody know of a specific product that I could use ?
Lewie
Hi,
I'm looking for someone to lay approximately 45 square meters of large format 20mm thick limestone flags in Clitheroe, Lancashire at some point in the next 2/3 weeks. Half the floor is sound bitumen & the other a sound but not great concrete screed.
Pictures & references of similar past...
Silasm
Thread
aus
find a tiler
large
limestone
tiler
tilers directory
usa
Just laid 30m limestone. All sealed with stain stop 3 days prior to laying. went down well and grouted very well with Ardex fl. The faces were washed straight away and then the joints finished as soon as the grout was ready.
When the grout was set they were given a hot wash and a buff with a...
I spoke to a fellow tiler the other day who laid a small tumbled limestone (medium grey colour tiles) on a kitchen floor using white rapid set (Mapei Keraquick). He is now paranoid he should have used grey addy instead but has reported no bleed through or any other issues.
Just got me thinking...
Qwerty
Thread
adhesive
aus
grey
limestone
tile adhesive
usa
white
I've been quoted for 2 different methods of fitting an UFH system by the electrician.
Both will use Raychem T2 heating wire.
The job is over 2 floors, 1 floor is solid concrete and the other will be a wooden sub-floor on solid concrete. The total job is about 360m2.
Method 1 - Prime floors, use...
doddsie
Thread
aus
electric
fitting
heating
limestone
ufh
underfloor
usa
Hello all,
Right, Ive done a 110sqm of limestone continuous floor. Its a non polished (matt) surface and obviously this makes it very difficult to completely remove all grout residue. I had washed it off, and repeated this 3 times. Assuming that i had got the majority, except it was left with a...
Hi all!,
I'm new on here so my name is Matt Taylor, I'm a director of Taylor Trade Ltd a plumbing, tiling, joinery and plastering company.
I'm just looking for some advice on a job I went to look at tonight.
It's about 50 m2 of limestone floor tiles, varying from 1200x600x20-800x600x20 with a...
could anyone help me source some b & q pilkington hot rock limestone kitchen tiles 100mm x 100mm the number on the box is hrk 02p i bought them approx 4 years ago in hotrock colour and 2 other colours that matched we have just altered the kitchen and need more or else we are going to have to...
Just about to lay 70m2 black limestone indoors, read a lot of horror stories so just looking for an insight. The customer / stone supplier is supplying all sealers. I intend to seal prior to laying, fronts sides and backs. I intend to seal again prior grouting and after grouting.
The horror...