Hello Guys,
Thought I'd run this past you,
I've got a customer who in his wisdom decided to visit Topps for his tiles for one of three of his bathrooms.
After explaining to him how bad the Travertine he selected was going to look, and the different grades on sale, he thankfully decided to change...
Hi All,
Would anyone be able to advise any experience using engineered tiles where top is natural stone and bottom high grade porcelain :
Spanish Light Emperador Marble - Natural Stone | Tilesporcelain - http://www.tilesporcelain.co.uk/marble-tiles/mb44-light-emperador-marble-wall-floor-tile
Hi All,
I’m getting all bits required to tile floor in my kitchen and conservatory, 1st I have had idea to buy some quartz tiles but after reading this forum I know quartz for conservatory is a no go … now I settled on marble tiles and my question is do I need any special prep for this tiles...
A cleaning lady asked me how to clean water marks off black marble. She says it's just drips off yer elbow while at the sink that has marked the floor..
My initial reaction was it doesn't sound like they are sealed properly but it could be something else so I thought I'd ask here.
I've...
Anyone tell me how to remove, if possible, blue water staining of marble tiles in a shower.
A job i did a year ago which the builder informs me has this problem, not see it myself yet.
Apart from my poor back are there any other problems I may run into with these monsters this is a 60 sq mtr kitchen / dining room with plenty cuts , not sure my vitrex will handle the cutting
All information on this subject would be much appreciated as I've priced up a job using this stuff and from what I've read on here I'm getting the feeling I should walk away or advice the customer to change the tile for sumat that will stay on the wall lol
I've picked up a job today the customer has bought the marble from porcelanosa having bin told it can take a 1mm joint I usually use mapei ultra colour plus grouts but it has a restriction of 2 mm minimum joint do any of u have a recommendation for a grout for 1mm joints ?
This is a 30m2 suspended timber floor in a kitchen,the units are already fitted.
The layers are Wayrock,9mm ply and Karndean on top.
This customer is looking to lay pos Marble (may porcelain look alike) on top. The floor has a lot of movement in it. I'm not sure if it's floating or not...
Good evening from Grand Cayman,
First of all let me express my apologies for lack of activity and updates. This hotel has literally taken over my life due to the deadlines that have been thrust upon us.
For asking this question and request for help, I will endeavor to give a decent update to...
cam_low
Thread
canada
floor
floor tiles
floor tiling
marble
problem
tile
tiles
I went to look at a job last night......24m2 of 400mm x 400mm x 15mm marble on various substrates,non of which would take that amount of weight.
I didn't get a conversation with the customer regarding the weight issues as she was busy dealing with other trades when I left the property.
So to...
After advice please I have a customer that has polished marble on a kitchen floor with fila mp 90 sealer and had a burst pipe up stairs and flooded the downstairs floor and it has left what I think are water marks not really bad but a little patchy what's the best thing to do to make it look...
got a job coming up with white marble , 12mm thick . Walls and floors , ordered slowest adhesive as I usually use with marble .
The customer has gone to Topps to pick up there tiles and he has told her I should no way use slow set and use rapid or it will come through and stain the tile ?
Now...
Hi Guys,
Anyone come accross this before? 4 inch stud wall 5m long x 2.8m high clad in 12mm hardibacker. Fixed 600 x 400 arrabascato italian marble tiles with Bal single part flexible slow set. lmm grout joints but left adequate expansion on the hardi and the tiles.
3 months no problem. Now a...
Gonzo1969
Thread
aus
crack
cracking
cracks
debonding
hairline
marble