Hi
We've knocked through our kitchen and dining room and taken up old stone/porcelain tiles in the kitchen and carpet in the dining room. There are several questions I have before I start tiling.
Here is a share link to a Google Drive folder with images: Tiling - Google Drive -...
Hi all,
New bathroom Job coming up Monday. Solid walls. Old files to rip off. Walls are skim on render. Guy says render is hard as rock dimensions are tight so not got room to dot and dab. If the render stays tight what would be best prep before tanking? All work I have done for last 5 years is...
Hi,
Am about to prep an old bathroom wall for a small bit of tiling - only a couple of m2 and using 200 x 100 bevelled / metro tiles.
As per photos below, the wall is generally straight and level but has a number of shallow (only up to 3 mm max depth) craters where the old tiles were removed...
Hi all. Looking for advice regarding tiling to resin floor ie is there anything that goes straight on it or is sanding back subfloor only option.
Thanks all
We are due to start tiling over the Terra Therma Wood 22 UFH heating system. What concerns me is the reflective plates that sit in the routed timber floor boards, they seem to be loose laid..... do you latex over them first or can you use a decoupling membrane direct on to the substate...
Stuart Retter
Thread
canada
floor
floor prep
floor tiling
prep
system
ufh
wood
So I have two new quotes and I'm a tiling virgin so want to be prepared for what to expect. Any tips on the subfloor prep is much appreciated. I'm panicking about making a mistake or drastically underestimating the time required to prep.
1. Old floor and wall tiles need removing and placing...
so, bit of info.... I’m looking to become a professional tiler but yet a long way to go!
But I’m just wondering if a kitchen i were tiling has uneven walls, how would you professionals go about it?
My old boss (not a tiler) did the “dot n dab” method which obviously is not the way to go!
In...
Ive been to see a large living room kitchen area ( knocked through) but the floor is quite springy. Its 15mm floorboards but there are quite a few sections of scrappy board ( 1 mtr lenghts)
Im worried 6mm overboarding will not take out the bounce.
another tiler had suggested using Ditra...
Hi,
We're just in the process of getting a new kitchen fitted and have had large 750mm square porcelain tiles laid and grouted. Only issue is that a few had a bit of a wobble on them a week or so after being laid and grouted. They came back, relaid the tiles in question but a week later there...
Hi all......got a timber floor to tile with 600 x 400 slate tiles. I know that its recommended to use a decoupling mat with natural stone....which I always do on a solid floor. However, this floor is 22mm chipboard and customer wants UFH fitted. I usually glue and screw 10mm insulation boards...
Hello everybody.
My first post on here; any advice and pointers greatly appreciated.
Ground floor extension c45m2.
Wet UFH system under 50mm of calcium screed (thermio plus).
Screed went down 4 weeks ago (sanded down after 2 weeks).
Final tile is a 600 x 300 porcelain.
I have had...
Hi Peeps
Looking at a floor this week with wet underfloor heating.
So the customer has said the heatings run to temp. Slab put down in January. Likley be end of may for tiling. Not tiled over wet underfloor heating before so want to make sure the preps right.
Any tips/advice much appreciated...
Hi Guys,
I have got loads of good information from you guys from reading through the posts on this forum but I still have a few questions I hope you can help with.
I am building a wet room on the second floor. I am planning to drop the floor to joist height with ply and then 20mm Jackoboard...
Hi.
Need to tile ensuite floor in extension which has currently got new T&G floorboards down.
Am having underfloor heating, one of the Prowire kits from Topps which suggest you put down a thermal backing board (6 mm or 10mm) that they sell.
Could they be fixed straight on the floorboards?
Or...
What would you all suggest for preparing our upstairs bathroom floor for tiling?
Currently it is standard T&G floorboards with gaps here and there where it was repaired by the previous owner.
My first thought was to put a thin ply over the existing and screw it down. Do I need to do anything...
Got a site meeting next week where the installation of a 200sqm floor will be discussed.
There are a handful of smaller rooms involved on the periphery, but the main area is basically T shaped. The bottom of the T is the entrance hall at around 26sqm, which opens up on the top line of the T as...
Hi guys!
Right, so I'm starting this job next week (I'm the builder as you know!) so I need to run by you the method I was planning on.
So its a wetroom. 1m x 4m approx. tiled floor, tiled shower area. Pretty much all components (sink, toilet, etc) will all be 'floating' so a clean floor...
Folks
This may not be the right Forum to post this on but I'm sure some of you will be knowledgeable in this field?!
I have been asked to prep a kitchen prior to installation of some fancy units etc.
The floor tiles tiles are 600 x 900 x 15 polished limestone so my first question is will 4"...
hi all.
Redoing bathroom, plan on tiling wall and full walls.
After a lot of research, I have found everyone does things differently!!
I’m dot and dabbing green plasterboard on walls and using floor backer on... floor.
Do I need to prep these surfaces before tiling? Is a primer or just go...