I have done searches but either I'm not searching for the right thing or I'm wearing my blonde wig. Or both!
An existing customer has asked me to price tiling a new conservatory. I have yet to visit the site but the information I have to date is:-
"We estimate that there is about 8” concrete...
Think I've been under charging for prep work to make sure I get to do it and know it's done right.
What do people charge supply and fit?
I'm figuring around £30 m² should be about fair
Any thoughts
After send the pictures this is the answer: ''You subsequently then went around taking pictures of areas that you deemed unsatisfactory in an effort to walk away from the job; despite a Master Tiler being present stipulating that it was fine to tile''.
Hi
I know these questions have been asked time and time again but here goes !
I have a ground floor area of a house around 160m2 to tile, the screed is calcuim sulphate , the depth is 70mm, this was laid around 3 months ago , all i need to know are the proper steps to follow , ie how dry etc...
tubs
Thread
adhesive
anhydrite
aus
floor
prep
screed
tile adhesive
usa
Hi, I am looking to tile my kitchen floor with 600x600 porcelain tiles and am not sure if I should be putting down ply or if I can use hardbacker? I've been on to the builder (fairly new house) to ask about subfloor & they confirmed on top of the structural concrete floor is 60mm insulation then...
Bill
Thread
advice
aus
bathroom
floor
floor prep
floor tiling
kitchen
kitchen floor
prep
required
usa
quick advice small bathroom area tiles going on the wall are ceramic 600x300 walls have been prepped with hardibacker shown in pic attatched would you taper the edges /joins where it meets the other board and seal ?? also would the area require tanking? its not a power shower going in just standard
terrycoe1
Thread
aus
job
jobs
prep
tiling jobs
tiling work
usa
work
I have a kitchen floor to do.. 26m
Half is floor boards (solid & sound)
half is concrete..
I was going to glue and screw 6mm hardie boards onto the boards, overlapping the concrete by 50-100mm, then make up the concrete depth with flexi SLC.. does this sound the best way?
Thanks in advance
Evening All
I know the briefest of details but I'm off to see a customer tomorrow where by the sounds he is having wet trays set then the screed poured to the required height.
Has anybody any experience of this, pit falls, tips, waterproofing, etc.
Apologies a bit lacking in detail but should...
kaharrison9
Thread
adhesive
anhydrite
aus
floor
floor tiling
prep
screed
tanking
usa
waterproofing
wetroom
wetroom tiling
Hi,
I have the following scenario & would be most grateful for any advise on this;
Kitchen floor in a new build house (11 yrs old) screed covered in an asphalt / bitumen (black shiny finish). Fairly level, no delamination or breaking up etc... (approx 30m2 hence standard not rapid set)...
Dickyparsnips
Thread
adhesive
advice
aus
floor
floor prep
floor tiling
please
prep
set
tile adhesive
usa
I'm soon to be laying some classic grey limestone random lengths in my garden . Just wondering on the best prep for it? It's currently just grass at the moment. Area to be tiled is approx 30sqm. I've never done any external tiling before so I was thinking of laying a concrete slab then tiling...
Hi
I have a small bathroom 2.4x2.5m divide by a step up across the middle which is where the bath and basin go. Plumber needs to remove the chipboard floor on the step level to plumb in new bath and vanity.
Considering what to put back down once he's done and that will also be suitable for...
Hi all
Theres a lot of conflicting advice all over the web on this one so can anybody agree this will be ok?
Job is an 8sqm kitchen floor, 300x300 granite tile with ufh also tiles cut to form 150mm skirting tiles.
Substrate is asphalt on concrete.
My proposed prep...
Slurry coat on asphalt then...
Have got a 30m2 kitchen floor to do in a couple of weeks,and the problem is at the moment the floor is solid oak flooring ,I have removed a small section to see whats underneath and it 12mm ply direct to the joist's ,the customer wants the cheapest way for the prep,I want to overboard with ply...
any one had experience of trying to prep with these walls of the devil
basically its compressed straw with a paper front much like plaster board
it had been skimmed when installed which i have scrapped off, leaving this paper face
the walls are made to suit dimensions of the house , so no...
First time i'v come across a anhydrate screed, and the screed people left these instructions for the tiler (me)So I just want to check if this is the right way to go. The screed is heated, and tiles are 800x800 porcelain
Sand the sheen off the floor, with a floor sander.
Prime with, 1 or 2...
A customer took up old tiles ready for me to come in and discovered a piece of 5 mm ply under the floor it's only about a foot wide and runs about 3 metres so I took up the ply and underneath was a set of radiator pipes and the ply sat on two pieces of 2x2 so as the rest of the floor is concrete...
mike1979
Thread
aus
floor
floor prep
floor tiling
opinions
prep
usa
Hi,
I'm after some advice on preparing the walls and floor of a bathroom for tiling. I want waterproof boards around the shower, and I'm currently going with Marmox. First question is on the stiffness of the Marmox boards: are 12.5mm boards really OK to go straight onto stud walls? There won't...
jbwtaylor
Thread
advice
aus
backerboard
bathroom
floor
floor tiling
hardiebacker
marmox
marmox backerboard
prep
stud
tile backerboard
usa
wall
I looked at a job last night they want natural stone on their down stairs hall way the floor is wooden floorboards may I add they are very flat and feel very secure so what do you think cement board it then ditra it out or just cement boards or just ditra
mike1979
Thread
advice
aus
job
jobs
natural
natural stone
prep
stone
tile setting
tiling jobs
tiling work
usa
work
Im currently ripping out my GF bathroom in her rented flat in Brighton. The flats are all concrete jungles. The floors are raised up by 2x2 nailed into the concrete and chipboard. This is essentially downstairs ceiling !
Low and behold I finally get to look at the sub base on this mornings new...
Hi All,
Hoping for for some help on this one, builder rang me today with a job of 50 sqm of 60x60 porcelain in a retail unit in a shopping centre.
He explained that they lifted the existing flooring which was some sort of wooden floor but underneath was, what he described as an industrial...