saw

Looking for a wet tile cutter, just something around 400mm bed for kitchens and small bathroom tiles, saving going outside with the grinder, but don't want to get wet using it, ordered one from ctd yesterday ND 180 rubi but have since read poor reviews, really looking at £150 ish spend Cheers...

Hello all What are the benefits of a bridge saw over a “normal” push though electric cutter. ? Are the cuts better for all tile types. I mainly use a grinder and the rubi nd 200. What would the advantage of a bridge saw over these. Are the cuts better on ceramic and porcelain tiles?

Hi everyone, I worked as an apprentice tiler with a well respected tiler ( now long gone) straight out of school whilst trying to make it as a footballer in the West London area! After three years. I went to college to become a PE teacher and have been in that profession for around 30 years...

Hi guys I know someone posted about a week or so ago dewalt v rubi. I currently have a Norton wet cut I've had for years. It's ok for the odd job but the fence accuracy is garbage. 600mm sq is probably the biggest I'll do as I'm a building contractor not tiler (before you chip in I do understand...

its time to get a new set. Any suggestions?

i keen to hear from anyone that has or has previously used or even seen a wet circular tile saw and what their opinion is..... I’ve been looking at this one

Hello lads It was just over 3 years that I have been using my Dewalt tile saw when it got burned down with all of my tools on New Years ev at Shurgard storage in Croydon. Very heart breaking situation but let's skip that. I basically need to replace everything I had. I replaced My old Rubi TX...

16 months old full working order owned from new Want £450 Ono I’m in postcode De12 area of Uk Any questions pm

Hi, I have a Husqvarna TS230F tile wet saw which takes a 230mm blade... I currently have a Marcrist Ck850 blade but it's starting to chip the tiles slightly so I'm looking for a new blade. What blades do you guys use? Cheers Stephen

was just thinking whether there’s a diamond blade available for a 165mm plunge saw with 20mm bore suitable for porcelain etc. I have found the ATS bushboard blade at 160mm so far. Is this up to clean cutting porcelain etc? Any alternatives?

I've a vitrex 750w wet cutter which generally suits my needs along with an angle grinder. However I have a couple of jobs coming up where I need 1m long cuts which need to be dead straight with both edges well finished. Can anyone recommend a saw and blade to do the job?

Really capable and easy to use wet-saw, for sale as I don't need it anymore. Hasn't been used much at all. Bought it for a few tricky cuts in my bathroom, which was all completed last year and I've not used it since. Two genuine blades included, with most of their life left still, the ceramic...

DeWalt d24000 wanted. Please send info regarding condition and price wanted etc. Cheers.

Good little saw in very good condition, for sale as I dont need it anymore. Hasn't been used much at all either. Two genuine blades included, the ceramic one that came with it and I bought and extra porcelain one when I bought it from emctiles. Both blades have done way less than a meter...

Currently I have a sigma 10m and a dewalt 24000 these two machines are very good for certain things but I'd like a rail saw find it much easier for wet trays the options Raimondi Battipav Montolit (Rubi is not a option there crappie)

Hi there I just want some feed back on the sigma 110 wet saw ? it cuts up to 1 meter and tilts to 45 and just looking for feed back cheers. Thank You.

Looking for recommendations for the Job I’m doing in a fortnight as theyve just told me the tiles will 450 x 900 & 150 x 900 porc. I’m goimg to need something suitable for cutting. Biggest manual cutter I have is 750mm and a 600mm bridge saw I know I could use my grinder but I feel the need for...

hi guys looking for some advice , need to buy a plunge saw for large format tiles must be 110 v , also will need the guide rail whats your thoughts on best out there looked at the rubi tc 180 but apparently don't do 110v like the look of the festool but cant find 100v...

Evening all,. I've got a job coming up which is approx. 300m2 600x1200 20mm porcelain. I'm looking to invest in a decent bridge saw and wondered what you guys are using and what you'd recommend or advise me to stay clear of. There will be a lot of envelope cuts so will probably be looking at...

Hi guys, I already own a DeWalt D24000, it’s a brilliant saw and makes a fantastic job of any cut I throw at it...the only problem with it is that it’s too big for some jobs. I also own a 110mm Plasplug wet saw that I’ve owned for about 12yrs and to be fair for the money it’s been a little...